10 material differences · fewer than 12
Tractor oneLeyland 2821979–1981No measured PTO figureTractor twoMassey Ferguson MF 194 (A)1980–1983No measured PTO figure
Which should you choose?
Read our verdict on the 282 and the MF 194 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 282 | MF 194 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 81.9 hp | 74.0 hp | +11% 282 |
| Engine declared | LEYLAND-MOTORS 4/98 TT | Perkins A 4.248 | differs |
| Displacement declared | 3.77 L | 4.07 L | +8% MF 194 (A) |
| Maximum torque declared | 207 lb·ft · 281 N·m | 212 lb·ft · 287 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 282 |
| Clutch declared | Dry Borg and Beck double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.0 gpm · 30.2 L/min | 7.1 gpm · 26.7 L/min | +13% 282 |
| Pressure declared | — | 2,489 psi · 172 bar | — |
| Three-point lift, at the coupling points declared | 5,199 lb · 2,358 kg | 4,134 lb · 1,875 kg | +26% 282 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,795 lb · 3,082 kg | 5,952 lb · 2,700 kg | +14% 282 |
| Wheelbase declared | 80.0 in · 2,032 mm | 90.2 in · 2,290 mm | +13% MF 194 (A) |
| Length declared | 146.9 in · 3,730 mm | 148.8 in · 3,780 mm | — |
| Width declared | 80.3 in · 2,040 mm | — | — |
| Ground clearance declared | 15.8 in · 402 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.27 m | 12.0 ft · 3.65 m | +12% MF 194 (A) |
| Fuel tank declared | 72.1 qt · 68.2 L | 64.5 qt · 61.0 L | +12% 282 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Leyland 282 sources
- Source: Traktorenlexikon, “Leyland 282”
Massey Ferguson MF 194 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 194”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”