- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1979–1981
WhichTractor size, not the maker’s category
Leyland 282 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 282.
Engine power, claimed · gross or net not stated
81.9 hp
61.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Leyland 282”, claimed
How much will a 282 lift?
A 282 lifts 5,199 lb (2,358 kg) at the lower-link ends.
| Pump flow | 8.0 gpm · 30.2 L/min |
|---|---|
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 5,199 lb · 2,358 kg |
| Hitch control | Lifting, holding, lowering, floating position and draft control |
Source · Traktorenlexikon, “Leyland 282”
What PTO does a 282 have?
A 282 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,813 rpm |
| Rear PTO shaft | 1 3/8" - 6 splines |
| PTO power, claimed | 70.8 hp · 52.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Leyland 282”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Leyland 282”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Leyland 282 — CC BY-SA 4.0, WIKIBOOKS-TL-116108 · revision 993762. Wikibooks contributors (Traktorenlexikon). Original document