8 material differences · fewer than 12

Tractor oneInternational Harvester 7561967–1971No measured PTO figureTractor twoLeyland 2821979–1981No measured PTO figure

Which should you choose?

Read our verdict on the 756 and the 282 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester 756 and Leyland 282, field by field
Field756282Gap
Engine
Engine power, claimed claimed75.0 hp81.9 hp+9% 282
Engine declared—LEYLAND-MOTORS 4/98 TT—
Displacement declared—3.77 L—
Maximum torque declared—207 lb·ft · 281 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declared—Dry Borg and Beck double clutch—
Hydraulics & hitch
Pump flow declared12.0 gpm · 45.5 L/min8.0 gpm · 30.2 L/min+51% 756
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared8,285 lb · 3,758 kg6,795 lb · 3,082 kg+22% 756
Wheelbase declared87.0 in · 2,210 mm80.0 in · 2,032 mm+9% 756
Length declared157.0 in · 3,988 mm146.9 in · 3,730 mm+7% 756
Width declared92.0 in · 2,337 mm80.3 in · 2,040 mm+15% 756
Ground clearance declared17.0 in · 432 mm15.8 in · 402 mm+7% 756
Turning radius, braked declared10.7 ft · 3.25 m10.7 ft · 3.27 m—
Fuel tank declared132.1 qt · 125.0 L72.1 qt · 68.2 L+83% 756

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester 756 sources

Source
  • Source: Traktorenlexikon, “IHC 756”

Leyland 282 sources

Source
  • Source: Traktorenlexikon, “Leyland 282”