WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1988–2000

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) specs: hp, weight, years

Perkins A 4.248 four-cylinder diesel. The manufacturer claimed 78.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

78.9 hp

58.8 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Landini R 8560 L (DT)”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,027 lb
3-point lift
4,630 lb
Hyd. flow
11.2 gpm
Top speed
18.6 mph

Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) specs: key facts

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) was built from 1988 to 2000.

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) has a claimed engine power (gross or net not stated) of 58.8 kW (78.9 hp); it has no measured PTO figure.

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) has a Perkins A 4.248 engine, a 4-cylinder 4.07 L diesel unit.Source 2

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) weighs 2,280 kg (5,027 lb) unladen.

  • The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) lifts 2,100 kg (4,630 lb) at the lower-link ends.

  • The hydraulic pump of the Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) delivers 42.3 L/min (11.2 gpm).

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

How does the 8560 L (DT) TL 40 N/M (TL-40 DT/M) compare with its class?

  • Limitation:

    A 62 L fuel tank is low for its class — 35% below the median of 94.8 L across the 344 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 2,280 kg is low for its class — 30% below the median of 3,280 kg across the 371 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 372 comparable records. How we work this out

Illustration of the 1988–2000 Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M), a 79 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) have?

The only figure for the 8560 L (DT) TL 40 N/M (TL-40 DT/M) is 78.9 hp (58.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
78.9 hp

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

What engine is in an 8560 L (DT) TL 40 N/M (TL-40 DT/M)?

An 8560 L (DT) TL 40 N/M (TL-40 DT/M) has a Perkins A 4.248, a 4-cylinder 4.07 L diesel engine.

Engine — 8560 L (DT) TL 40 N/M (TL-40 DT/M) engine specifications
Make & modelPerkins A 4.248Source 2
Cylinders4, liquid-cooledSource 2
Displacement248.2 ci · 4.07 LSource 2
Max torque208 lb·ft · 282 N·m @ 1,400 rpm
InjectionDirect injection method
Electrical system12 V

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

How much will an 8560 L (DT) TL 40 N/M (TL-40 DT/M) lift, and what is its hydraulic flow?

An 8560 L (DT) TL 40 N/M (TL-40 DT/M) lifts 4,630 lb (2,100 kg) at the lower-link ends.

Hydraulics & PTO — 8560 L (DT) TL 40 N/M (TL-40 DT/M) hydraulics and PTO specifications
Pump flow11.2 gpm · 42.3 L/min
Pressure2,756 psi · 190 bar
Lift at ends4,630 lb · 2,100 kg
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpm @ 1,944 engine rpmGround-speed PTO available
PTO shaft1 3/8"- 6 splines (Form-1)

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

What transmission does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) have?

Transmission specifications for the 8560 L (DT) TL 40 N/M (TL-40 DT/M) are below.

Transmission — 8560 L (DT) TL 40 N/M (TL-40 DT/M) transmission specifications
ClutchDry and air-cooled OMG double clutch
BrakesPedal-operated, hydraulically wet multi-disc brake
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

How much does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) weigh?

An 8560 L (DT) TL 40 N/M (TL-40 DT/M) weighs 5,027 lb (2,280 kg) unladen.

Weights & dimensions — 8560 L (DT) TL 40 N/M (TL-40 DT/M) weights and dimensions
Unladen weight5,027 lb · 2,280 kgDT: 2,465
Wheelbase81.5 in · 2,070 mmDT: 2,014
Length140.6 in · 3,570 mm
Width61.4–89.4 in · 1,560–2,270 mm
Height93.7 in · 2,380 mm
Ground clearance16.5 in · 420 mmDT: 320
Front track49.2–65.0 in · 1,250–1,650 mmDT: 1,230-1,530
Rear track44.9–66.5 in · 1,140–1,690 mm
Turning radius, braked10.9 ft · 3.33 mDT: 4,550

Source · Traktorenlexikon, “Landini R 8560 L (DT)”

What oil does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) take, and how much?

An 8560 L (DT) TL 40 N/M (TL-40 DT/M) engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

8560 L (DT) TL 40 N/M (TL-40 DT/M) fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.4 qt · 7.0 LSource: Traktorenlexikon, “Landini R 8560 L (DT)” · single source, not independently verified
Transmission32.8 qt · 31.0 LSource: Traktorenlexikon, “Landini R 8560 L (DT)” · single source, not independently verified
Front axle5.1 qt · 4.8 LSource: Traktorenlexikon, “Landini R 8560 L (DT)” · single source, not independently verified
Cooling system16.4 qt · 15.5 LSource: Traktorenlexikon, “Landini R 8560 L (DT)” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 8560 L (DT) TL 40 N/M (TL-40 DT/M)?

Within 10% of its 78.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M)

Is an 8560 L (DT) TL 40 N/M (TL-40 DT/M) two-wheel drive or four-wheel drive?

The Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) have?

An 8560 L (DT) TL 40 N/M (TL-40 DT/M) has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Landini R 8560 L (DT)”; and Traktorenlexikon, “Massey Ferguson MF 178”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Landini R 8560 L (DT) — CC BY-SA 4.0, WIKIBOOKS-TL-113131 · revision 991550. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 178 — CC BY-SA 4.0, WIKIBOOKS-TL-76619 · revision 1069046. Wikibooks contributors (Traktorenlexikon). Original document