13 material differences

Tractor oneHürlimann H-478 "Prestige"1989–1998No measured PTO figureTractor twoLandini 8560 L (DT) TL 40 N/M (TL-40 DT/M)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the H-478 "Prestige" and the 8560 L (DT) TL 40 N/M (TL-40 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-478 "Prestige" and Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M), field by field
FieldH-478 "Prestige"8560 L (DT) TL 40 N/M (TL-40 DT/M)Gap
Engine
Engine power, claimed claimed78.9 hp78.9 hp—
Engine declaredHürlimann H-1000.4 W-1Perkins A 4.248differs
Displacement declared4.00 L4.07 L—
Maximum torque declared193 lb·ft · 261 N·m208 lb·ft · 282 N·m+8% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredPedal-operated dry SLH single-disc clutch as driving clutchDry and air-cooled OMG double clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared10.7 gpm · 40.5 L/min11.2 gpm · 42.3 L/min—
Pressure declared3,046 psi · 210 bar2,756 psi · 190 bar+11% H-478 "Prestige"
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared7,485 lb · 3,395 kg5,027 lb · 2,280 kg+49% H-478 "Prestige"
Wheelbase declared91.3 in · 2,320 mm81.5 in · 2,070 mm+12% H-478 "Prestige"
Length declared155.9 in · 3,960 mm140.6 in · 3,570 mm+11% H-478 "Prestige"
Width declared82.3–105.9 in · 2,090–2,690 mm61.4–89.4 in · 1,560–2,270 mmdiffers
Ground clearance declared18.5 in · 470 mm16.5 in · 420 mm+12% H-478 "Prestige"
Turning radius, braked declared16.2 ft · 4.95 m10.9 ft · 3.33 m+49% H-478 "Prestige"
Fuel tank declared116.2 qt · 110.0 L65.5 qt · 62.0 L+77% H-478 "Prestige"

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hürlimann H-478 "Prestige" sources

Source
  • Source: Traktorenlexikon, “Hürlimann H 478 Prestige”

Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) sources

Source
  • Source: Traktorenlexikon, “Landini R 8560 L (DT)”
  • Source: Traktorenlexikon, “Massey Ferguson MF 178”