13 material differences

Tractor oneLamborghini R 774-80 (DT)1989–1998No measured PTO figureTractor twoLandini 8560 L (DT) TL 40 N/M (TL-40 DT/M)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the R 774-80 (DT) and the 8560 L (DT) TL 40 N/M (TL-40 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 4 fields identical or within 5%, which is not counted as material

Lamborghini R 774-80 (DT) and Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M), field by field
FieldR 774-80 (DT)8560 L (DT) TL 40 N/M (TL-40 DT/M)Gap
Engine
Engine power, claimed claimed78.9 hp78.9 hp—
Engine declaredSAME 1000.4 W 1Perkins A 4.248differs
Displacement declared4.00 L4.07 L—
Maximum torque declared209 lb·ft · 284 N·m208 lb·ft · 282 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6 mph · 30 km/hdiffers
Clutch declaredPedal operated, dry Lamborghini single disc clutchDry and air-cooled OMG double clutchdiffers
Hydraulics & hitch
Pump flow declared9.5 gpm · 35.8 L/min11.2 gpm · 42.3 L/min+18% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Pressure declared1,740 psi · 120 bar2,756 psi · 190 bar+58% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Three-point lift, at the coupling points declared5,964 lb · 2,705 kg4,630 lb · 2,100 kg+29% R 774-80 (DT)
Rear PTO speeds declared540/1000/540E/1000E rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,790 lb · 3,080 kg5,027 lb · 2,280 kg+35% R 774-80 (DT)
Wheelbase declared94.9 in · 2,410 mm81.5 in · 2,070 mm+16% R 774-80 (DT)
Length declared144.5 in · 3,670 mm140.6 in · 3,570 mm—
Width declared81.1–104.7 in · 2,060–2,660 mm61.4–89.4 in · 1,560–2,270 mmdiffers
Ground clearance declared20.5 in · 520 mm16.5 in · 420 mm+24% R 774-80 (DT)
Turning radius, braked declared9.6 ft · 2.94 m10.9 ft · 3.33 m+13% 8560 L (DT) TL 40 N/M (TL-40 DT/M)
Fuel tank declared116.2 qt · 110.0 L65.5 qt · 62.0 L+77% R 774-80 (DT)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lamborghini R 774-80 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”

Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) sources

Source
  • Source: Traktorenlexikon, “Landini R 8560 L (DT)”
  • Source: Traktorenlexikon, “Massey Ferguson MF 178”