- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1988–2000
WhichTractor size, not the maker’s category
Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) Hydraulics & PTO specs
10 hydraulics and PTO values on record for the 8560 L (DT) TL 40 N/M (TL-40 DT/M).
Engine power, claimed · gross or net not stated
78.9 hp
58.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini R 8560 L (DT)”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 8560 L (DT) TL 40 N/M (TL-40 DT/M) lift?
An 8560 L (DT) TL 40 N/M (TL-40 DT/M) lifts 4,630 lb (2,100 kg) at the lower-link ends.
| Pump flow | 11.2 gpm · 42.3 L/min |
|---|---|
| Hydraulic pressure | 2,756 psi · 190 bar |
| Rear remote valves | 2 |
| Lift capacity at ball ends | 4,630 lb · 2,100 kg |
Source · Traktorenlexikon, “Landini R 8560 L (DT)”
What PTO does an 8560 L (DT) TL 40 N/M (TL-40 DT/M) have?
An 8560 L (DT) TL 40 N/M (TL-40 DT/M) has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 1,944 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Landini R 8560 L (DT)”
Sources and how this page was built
10 hydraulics and PTO values from Traktorenlexikon, “Landini R 8560 L (DT)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini R 8560 L (DT) — CC BY-SA 4.0, WIKIBOOKS-TL-113131 · revision 991550. Wikibooks contributors (Traktorenlexikon). Original document