- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1973–1983
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Landini R-7500 (DT) "TL 20 N/B" specs: hp, weight, years
Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 71 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
71 hp
53 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 7500”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,181 lb
- 3-point lift
- 4,420 lb
- Hyd. flow
- 7.4 gpm
- Top speed
- 18.6 mph
Landini R-7500 (DT) "TL 20 N/B" specs: key facts
The Landini R-7500 (DT) "TL 20 N/B" was built from 1973 to 1983.
The Landini R-7500 (DT) "TL 20 N/B" has a claimed engine power (gross or net not stated) of 53 kW (71 hp); it has no measured PTO figure.
The Landini R-7500 (DT) "TL 20 N/B" was offered in two-wheel-drive and four-wheel-drive versions.
The Landini R-7500 (DT) "TL 20 N/B" has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 2
The Landini R-7500 (DT) "TL 20 N/B" weighs 2,350 kg (5,181 lb) unladen.
The Landini R-7500 (DT) "TL 20 N/B" has an independent rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Landini R-7500 (DT) "TL 20 N/B" lifts 2,005 kg (4,420 lb) at the lower-link ends.
The hydraulic pump of the Landini R-7500 (DT) "TL 20 N/B" delivers 28.0 L/min (7.4 gpm).
Source · Traktorenlexikon, “Landini 7500”
How does the R-7500 (DT) "TL 20 N/B" compare with its class?
- Worth knowing:
An unladen mass of 2,350 kg is low for its class — 22% below the median of 3,000 kg across the 400 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 400 comparable records. How we work this out

How much horsepower does a R-7500 (DT) "TL 20 N/B" have?
The only figure for the R-7500 (DT) "TL 20 N/B" is 71 hp (53 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Landini 7500”
What engine is in a R-7500 (DT) "TL 20 N/B"?
A R-7500 (DT) "TL 20 N/B" has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.
| Make & model | Perkins A 4.236Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 236.0 ci · 3.87 LSource 2 |
| Max torque | 196 lb·ft · 266 N·m @ 1,300 rpm |
| Injection | direct injection method |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Landini 7500”
How much will a R-7500 (DT) "TL 20 N/B" lift, and what is its hydraulic flow?
A R-7500 (DT) "TL 20 N/B" lifts 4,420 lb (2,005 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 7.4 gpm · 28.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 4,420 lb · 2,005 kg |
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm @ 1,944 engine rpmGround-speed PTO available |
| PTO shaft | 1 3/8"-6 splines |
Source · Traktorenlexikon, “Landini 7500”
What transmission does a R-7500 (DT) "TL 20 N/B" have?
Transmission specifications for the R-7500 (DT) "TL 20 N/B" are below.
| Clutch | Dry LUK double clutch |
|---|---|
| Steering | Mechanical CAM-GEARS worm steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Landini 7500”
How much does a R-7500 (DT) "TL 20 N/B" weigh?
A R-7500 (DT) "TL 20 N/B" weighs 5,181 lb (2,350 kg) unladen.
| Unladen weight | 5,181 lb · 2,350 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 88.2 in · 2,240 mmtwo-wheel-drive version |
| Length | 142.5 in · 3,620 mmtwo-wheel-drive version |
| Width | 71.7–91.7 in · 1,820–2,330 mm |
| Height | 90.9 in · 2,310 mm |
| Ground clearance | 17.3 in · 440 mmtwo-wheel-drive version |
| Front track | 55.1–74.8 in · 1,400–1,900 mmtwo-wheel-drive version |
| Rear track | 55.1–74.8 in · 1,400–1,900 mmtwo-wheel-drive version |
| Turning radius, braked | 11.2 ft · 3.42 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Landini 7500”
What oil does a R-7500 (DT) "TL 20 N/B" take, and how much?
A R-7500 (DT) "TL 20 N/B" engine takes 7.5 qt (7.1 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.5 qt · 7.1 LSource: Traktorenlexikon, “Landini 7500” · single source, not independently verified |
| Transmission | 22.2 qt · 21.0 LSource: Traktorenlexikon, “Landini 7500” · single source, not independently verified |
| Front axle | 4.8 qt · 4.5 LSource: Traktorenlexikon, “Landini 7500” · single source, not independently verified |
| Cooling system | 15.9 qt · 15.0 LSource: Traktorenlexikon, “Landini 7500” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a R-7500 (DT) "TL 20 N/B"?
Within 10% of its 71 hp of claimed engine power, the same type, and first built within 15 years of it.
- Lamborghini R-754 (DT)71 hp engine, claimed · 1975–1985Side by side with the R-7500 (DT) "TL 20 N/B" →
- International Harvester Hydro 8671 hp engine, claimed · 1976–1980Side by side with the R-7500 (DT) "TL 20 N/B" →
- Lamborghini R-704 (DT)71 hp engine, claimed · 1976–1982Side by side with the R-7500 (DT) "TL 20 N/B" →
- Ford 561071 hp engine, claimed · 1981–1991Side by side with the R-7500 (DT) "TL 20 N/B" →
- Landini 7830 (DT) TL-20 N/F (TL-20 DT/F)71 hp engine, claimed · 1983–1987Side by side with the R-7500 (DT) "TL 20 N/B" →
- VALMET 605/605-471.1 hp engine, claimed · 1983–1989Side by side with the R-7500 (DT) "TL 20 N/B" →
Common questions about the Landini R-7500 (DT) "TL 20 N/B"
Is a R-7500 (DT) "TL 20 N/B" two-wheel drive or four-wheel drive?
The Landini R-7500 (DT) "TL 20 N/B" was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a R-7500 (DT) "TL 20 N/B" have?
A R-7500 (DT) "TL 20 N/B" has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"-6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Landini 7500”; and Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 7500 — CC BY-SA 4.0, WIKIBOOKS-TL-112804 · revision 991536. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 168 & MF 168A — CC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document