- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1983–1989
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 605/605-4 Full specifications
VALMET TD 33 DS 6 three-cylinder diesel. The manufacturer claimed 71.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
71.1 hp
53.0 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 605”, claimed
- Weight
- 7,584 lb
- 3-point lift
- 8,699 lb
- Hyd. flow
- 13.9 gpm
- Top speed
- 18.6 mph
VALMET 605/605-4 specs: key facts
The VALMET 605/605-4 was built from 1983 to 1989.
The VALMET 605/605-4 has a claimed engine power (gross or net not stated) of 53.0 kW (71.1 hp); it has no measured PTO figure.
The VALMET 605/605-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 605/605-4 has a VALMET TD 33 DS 6 engine, a 3-cylinder 3.30 L diesel unit.
The VALMET 605/605-4 weighs 3,440 kg (7,584 lb) unladen.
The VALMET 605/605-4 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the VALMET 605/605-4 lifts 3,946 kg (8,699 lb) at the lower-link ends.
The hydraulic pump of the VALMET 605/605-4 delivers 52.7 L/min (13.9 gpm).
Source · Traktorenlexikon, “Valmet 605”
How much horsepower does a 605/605-4 have?
The only figure for the 605/605-4 is 71.1 hp (53.0 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 605”
What engine is in a 605/605-4?
A 605/605-4 has a VALMET TD 33 DS 6, a 3-cylinder 3.30 L diesel engine.
| Make & model | VALMET TD 33 DS 6 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 201.3 ci · 3.30 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 605”
How much will a 605/605-4 lift, and what is its hydraulic flow?
A 605/605-4 lifts 8,699 lb (3,946 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 13.9 gpm · 52.7 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 8,699 lb · 3,946 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,893 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Valmet 605”
What transmission does a 605/605-4 have?
Transmission specifications for the 605/605-4 are below.
| Clutch | Pedal operated dry LuK single-disc clutch |
|---|---|
| Brakes | Pedal operated hydraulic wet GIRLING disc brakes acting on differential shafts |
| Steering | Hydrostatic DANFOSS steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 605”
How much does a 605/605-4 weigh?
A 605/605-4 weighs 7,584 lb (3,440 kg) unladen.
| Unladen weight | 7,584 lb · 3,440 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 93.2 in · 2,368 mmtwo-wheel-drive version |
| Length | 168.9 in · 4,290 mm |
| Width | 80.3 in · 2,040 mm |
| Height | 105.1 in · 2,670 mm |
| Ground clearance | 17.1 in · 435 mm |
| Front track | 60.8–72.6 in · 1,545–1,845 mmtwo-wheel-drive version |
| Rear track | 63.1–82.1 in · 1,602–2,086 mm |
Source · Traktorenlexikon, “Valmet 605”
Which tractors compare with a 605/605-4?
Within 10% of its 64.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VOLVO-BM-VALMET Volvo 60564.6 hp PTO, claimed · 1983–1985Side by side with the 605/605-4 →
- Renault 681 (S)64.6 hp PTO, claimed · 1979–1986Side by side with the 605/605-4 →
- Renault 681-4 (S)64.6 hp PTO, claimed · 1979–1986Side by side with the 605/605-4 →
- Massey Ferguson MF 3060 (A)64.7 hp PTO, claimed · 1986–1992Side by side with the 605/605-4 →
- Landini 8800 (DT)64.8 hp PTO, claimed · 1987–2000Side by side with the 605/605-4 →
- Deutz-Fahr D 6907 A ( C )64.4 hp PTO, claimed · 1983–1984Side by side with the 605/605-4 →
Everything else people ask
Is a 605/605-4 two-wheel drive or four-wheel drive?
The VALMET 605/605-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 605/605-4 have?
A 605/605-4 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 605”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 605 — CC BY-SA 4.0, WIKIBOOKS-TL-116349 · revision 997676. Wikibooks contributors (Traktorenlexikon). Original document