7 material differences · fewer than 12

F)1983–1987No measured PTO figure

Which should you choose?

Read our verdict on the R-7500 (DT) "TL 20 N/B" and the 7830 (DT) TL-20 N/F (TL-20 DT/F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Landini R-7500 (DT) "TL 20 N/B" and Landini 7830 (DT) TL-20 N/F (TL-20 DT/F), field by field
Field	R-7500 (DT) "TL 20 N/B"	7830 (DT) TL-20 N/F (TL-20 DT/F)	Gap
Engine
Engine power, claimed claimed	71 hp	71 hp	—
Engine declared	Perkins A 4.236	Perkins A 4.236	—
Displacement declared	3.87 L	3.87 L	—
Maximum torque declared	196 lb·ft · 266 N·m	202 lb·ft · 274 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry LUK double clutch	—	—
Hydraulics & hitch
Pump flow declared	7.4 gpm · 28.0 L/min	10.2 gpm · 38.7 L/min	+38% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Three-point lift, at the coupling points declared	4,420 lb · 2,005 kg	6,724 lb · 3,050 kg	+52% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,181 lb · 2,350 kg	5,986 lb · 2,715 kg	+16% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Wheelbase declared	88.2 in · 2,240 mm	87.0 in · 2,210 mm	—
Length declared	142.5 in · 3,620 mm	147.6 in · 3,750 mm	—
Width declared	71.7–91.7 in · 1,820–2,330 mm	78.7 in · 1,999 mm	differs
Height, over the safety frame declared	90.9 in · 2,310 mm	94.4 in · 2,399 mm	—
Ground clearance declared	17.3 in · 440 mm	21.1 in · 535 mm	+22% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Turning radius, braked declared	11.2 ft · 3.42 m	12.8 ft · 3.89 m	+14% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Fuel tank declared	64.5 qt · 61.0 L	63.9 qt · 60.5 L	—

Source

Source