• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1983–1987

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) Full specifications

Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 71 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

71 hp

53 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Landini 7830 (DT)”, claimed

Weight
5,986 lb
3-point lift
6,724 lb
Hyd. flow
10.2 gpm
Top speed
18.6 mph

Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) specs: key facts

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) was built from 1983 to 1987.

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has a claimed engine power (gross or net not stated) of 53 kW (71 hp); it has no measured PTO figure.

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 2

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) weighs 2,715 kg (5,986 lb) unladen.

  • The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) lifts 3,050 kg (6,724 lb) at the lower-link ends.

  • The hydraulic pump of the Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) delivers 38.7 L/min (10.2 gpm).

Source · Traktorenlexikon, “Landini 7830 (DT)”

How much horsepower does a 7830 (DT) TL-20 N/F (TL-20 DT/F) have?

The only figure for the 7830 (DT) TL-20 N/F (TL-20 DT/F) is 71 hp (53 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
71 hp

Source · Traktorenlexikon, “Landini 7830 (DT)”

What engine is in a 7830 (DT) TL-20 N/F (TL-20 DT/F)?

A 7830 (DT) TL-20 N/F (TL-20 DT/F) has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.

Engine — 7830 (DT) TL-20 N/F (TL-20 DT/F) engine specifications
Make & modelPerkins A 4.236Source 2
Cylinders4, liquid-cooledSource 2
Displacement236.0 ci · 3.87 LSource 2
Max torque202 lb·ft · 274 N·m @ 1,201 rpm
Electrical system12 V

Source · Traktorenlexikon, “Landini 7830 (DT)”

How much will a 7830 (DT) TL-20 N/F (TL-20 DT/F) lift, and what is its hydraulic flow?

A 7830 (DT) TL-20 N/F (TL-20 DT/F) lifts 6,724 lb (3,050 kg) at the lower-link ends.

Hydraulics & PTO — 7830 (DT) TL-20 N/F (TL-20 DT/F) hydraulics and PTO specifications
Pump flow10.2 gpm · 38.7 L/min
Lift at ends6,724 lb · 3,050 kg
Rear PTO540/1000 rpm @ 1,944 engine rpm
PTO shaft1 3/8"- 6 splines (Form-1)

Source · Traktorenlexikon, “Landini 7830 (DT)”

What transmission does a 7830 (DT) TL-20 N/F (TL-20 DT/F) have?

Transmission specifications for the 7830 (DT) TL-20 N/F (TL-20 DT/F) are below.

Transmission — 7830 (DT) TL-20 N/F (TL-20 DT/F) transmission specifications
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Landini 7830 (DT)”

How much does a 7830 (DT) TL-20 N/F (TL-20 DT/F) weigh?

A 7830 (DT) TL-20 N/F (TL-20 DT/F) weighs 5,986 lb (2,715 kg) unladen.

Weights & dimensions — 7830 (DT) TL-20 N/F (TL-20 DT/F) weights and dimensions
Unladen weight5,986 lb · 2,715 kgDT: 2,900
Wheelbase87.0 in · 2,210 mmDT: 2,180
Length147.6 in · 3,750 mmDT: 3,775
Width78.7 in · 1,999 mm
Height94.4 in · 2,399 mm
Ground clearance21.1 in · 535 mmDT: 410
Front track55.9–75.6 in · 1,420–1,920 mmDT: 1,560
Rear track59.3–79.0 in · 1,506–2,006 mm
Turning radius, braked12.8 ft · 3.89 mDT: 4,500

Source · Traktorenlexikon, “Landini 7830 (DT)”

Which tractors compare with a 7830 (DT) TL-20 N/F (TL-20 DT/F)?

Within 10% of its 71 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 7830 (DT) TL-20 N/F (TL-20 DT/F) two-wheel drive or four-wheel drive?

The Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 7830 (DT) TL-20 N/F (TL-20 DT/F) have?

A 7830 (DT) TL-20 N/F (TL-20 DT/F) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Landini 7830 (DT)”; and Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Landini 7830 (DT)CC BY-SA 4.0, WIKIBOOKS-TL-112913 · revision 991526. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 168 & MF 168ACC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document