- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1965–1967
- 6,962 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
John Deere-LANZ 710 Full specifications
John Deere 202 D 23 L four-cylinder diesel. The manufacturer claimed 49.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere-Lanz 710”, claimed
- Weight
- 4,925 lb
- 3-point lift
- 3,968 lb
- Hyd. flow
- 4.1 gpm
- Top speed
- 12.4–15.5 mph
John Deere-LANZ 710 specs: key facts
The John Deere-LANZ 710 was built from 1965 to 1967.
The John Deere-LANZ 710 has a claimed engine power (gross or net not stated) of 36.8 kW (49.3 hp); it has no measured PTO figure.
The John Deere-LANZ 710 is two-wheel drive (2WD).
The John Deere-LANZ 710 has a John Deere 202 D 23 L engine, a 4-cylinder 3.32 L diesel unit.
The John Deere-LANZ 710 weighs 2,234 kg (4,925 lb) unladen.
The John Deere-LANZ 710 has a rear PTO running at 540/1000 rpm.
The three-point hitch of the John Deere-LANZ 710 lifts 1,800 kg (3,968 lb) at the lower-link ends.
The hydraulic pump of the John Deere-LANZ 710 delivers 15.6 L/min (4.1 gpm).
Source · Traktorenlexikon, “John Deere-Lanz 710”
How much horsepower does a 710 have?
The only figure for the 710 is 49.3 hp (36.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “John Deere-Lanz 710”
What engine is in a 710?
A 710 has a John Deere 202 D 23 L, a 4-cylinder 3.32 L diesel engine.
| Make & model | John Deere 202 D 23 L |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 202.6 ci · 3.32 L |
| Max torque | 132 lb·ft · 178 N·m @ 1,430 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “John Deere-Lanz 710”
How much will a 710 lift, and what is its hydraulic flow?
A 710 lifts 3,968 lb (1,800 kg) at the lower-link ends.
| Pump flow | 4.1 gpm · 15.6 L/min |
|---|---|
| Pressure | 2,162 psi · 149 bar |
| Lift at ends | 3,968 lb · 1,800 kg |
| Rear PTO | 540/1000 rpm @ 2,250 engine rpm |
Source · Traktorenlexikon, “John Deere-Lanz 710”
What transmission does a 710 have?
Transmission specifications for the 710 are below.
| Steering | Mechanical ZF spindle steering type GD-28 |
|---|---|
| Top speed | 12.4–15.5 mph · 20–25 km/hthe article lists alternatives |
Source · Traktorenlexikon, “John Deere-Lanz 710”
How much does a 710 weigh?
A 710 weighs 4,925 lb (2,234 kg) unladen.
| Unladen weight | 4,925 lb · 2,234 kg |
|---|---|
| Maximum permissible mass | 7,716 lb · 3,500 kg |
| Maximum front axle load | 3,131 lb · 1,420 kg |
| Maximum rear axle load | 5,181 lb · 2,350 kg |
| Wheelbase | 86.6 in · 2,200 mm |
| Length | 139.0 in · 3,530 mm |
| Width | 70.5 in · 1,790 mm |
| Height | 68.9 in · 1,750 mm |
| Ground clearance | 19.7 in · 500 mm |
| Front track | 49.2–68.9 in · 1,250–1,750 mm |
| Rear track | 53.1–59.1 in · 1,350–1,500 mm |
| Turning radius, braked | 10.2 ft · 3.10 m |
Source · Traktorenlexikon, “John Deere-Lanz 710”
Which tractors compare with a 710?
Within 10% of its 49.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- IMT 55549.3 hp engine, claimed · 1964–1971Side by side with the 710 →
- ALLIS-CHALMERS FD-549.3 hp engine, claimed · 1963–1965Side by side with the 710 →
- John Deere-LANZ 70049.3 hp engine, claimed · 1963–1965Side by side with the 710 →
- Porsche-Diesel Master 40949.3 hp engine, claimed · 1962–1963Side by side with the 710 →
- New Holland 3935 (A)49.3 hp engine, claimed · 1969–1999Side by side with the 710 →
- SOMECA SOM-5049.3 hp engine, claimed · 1961–1963Side by side with the 710 →
Everything else people ask
Is a 710 two-wheel drive or four-wheel drive?
The John Deere-LANZ 710 is two-wheel drive (2WD).
What PTO does a 710 have?
A 710 has a 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “John Deere-Lanz 710”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere-Lanz 710 — CC BY-SA 4.0, WIKIBOOKS-TL-49765 · revision 986616. Wikibooks contributors (Traktorenlexikon). Original document