- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1965–1967
- 6,962 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
John Deere-LANZ 710 Dimensions & weights
15 dimension and weight values on record for the 710.
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere-Lanz 710”, claimed
How big is a 710?
A 710 is 139.0 in (3,530 mm) long, 70.5 in (1,790 mm) wide and 68.9 in (1,750 mm) tall.
| Wheelbase | 86.6 in · 2,200 mm |
|---|---|
| Length | 139.0 in · 3,530 mm |
| Width | 70.5 in · 1,790 mm |
| Height to top | 68.9 in · 1,750 mm |
| Ground clearance | 19.7 in · 500 mm |
| Front track | 49.2–68.9 in · 1,250–1,750 mm |
| Rear track | 53.1–59.1 in · 1,350–1,500 mm |
| Turning radius with brakes | 10.2 ft · 3.10 m |
| Turning radius without brakes | 11.2 ft · 3.40 m |
Source · Traktorenlexikon, “John Deere-Lanz 710”
How much does a 710 weigh?
A 710 weighs 4,925 lb (2,234 kg) unballasted.
| Weight, unballasted | 4,925 lb · 2,234 kg |
|---|---|
| Maximum permissible mass | 7,716 lb · 3,500 kg |
| Maximum front axle load | 3,131 lb · 1,420 kg |
| Maximum rear axle load | 5,181 lb · 2,350 kg |
Source · Traktorenlexikon, “John Deere-Lanz 710”
What tyres does a 710 take?
Tyre sizes for the 710 are below.
| Front tyre, standard | 6.50-16 ASF |
|---|---|
| Rear tyre, standard | 11-32 AS |
Source · Traktorenlexikon, “John Deere-Lanz 710”
Where this page comes from
15 dimension and weight values from Traktorenlexikon, “John Deere-Lanz 710”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere-Lanz 710 — CC BY-SA 4.0, WIKIBOOKS-TL-49765 · revision 986616. Wikibooks contributors (Traktorenlexikon). Original document