- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1963–1965
- 3,021 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
John Deere-LANZ 700 Full specifications
John Deere 405 four-cylinder diesel. The manufacturer claimed 49.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere-Lanz 700”, claimed
- Weight
- 5,071 lb
- Top speed
- 12.4–18.6 mph
John Deere-LANZ 700 specs: key facts
The John Deere-LANZ 700 was built from 1963 to 1965.
The John Deere-LANZ 700 has a claimed engine power (gross or net not stated) of 36.8 kW (49.3 hp); it has no measured PTO figure.
The John Deere-LANZ 700 is two-wheel drive (2WD).
The John Deere-LANZ 700 has a John Deere 405 engine, a 4-cylinder 2.71 L diesel unit.
The John Deere-LANZ 700 weighs 2,300 kg (5,071 lb) unladen.
The John Deere-LANZ 700 has a rear PTO running at 540/1000 rpm.
Source · Traktorenlexikon, “John Deere-Lanz 700”
How much horsepower does a 700 have?
The only figure for the 700 is 49.3 hp (36.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “John Deere-Lanz 700”
What engine is in a 700?
A 700 has a John Deere 405, a 4-cylinder 2.71 L diesel engine.
| Make & model | John Deere 405 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 165.1 ci · 2.71 L |
| Max torque | 125 lb·ft · 170 N·m @ 1,300 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “John Deere-Lanz 700”
How much will a 700 lift?
Hydraulic and PTO specifications for the 700 are below.
| Rear PTO | transmission-driven, 540/1000 rpm |
|---|
Source · Traktorenlexikon, “John Deere-Lanz 700”
What transmission does a 700 have?
Transmission specifications for the 700 are below.
| Top speed | 12.4–18.6 mph · 20–30 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “John Deere-Lanz 700”
How much does a 700 weigh?
A 700 weighs 5,071 lb (2,300 kg) unladen.
| Unladen weight | 5,071 lb · 2,300 kg |
|---|---|
| Maximum permissible mass | 7,716 lb · 3,500 kg |
| Wheelbase | 76.8 in · 1,950 mm |
| Length | 133.5 in · 3,390 mm |
| Width | 65.0 in · 1,650 mm |
| Height | 62.4 in · 1,585 mm |
| Ground clearance | 15.2 in · 385 mm |
| Front track | 49.2–82.7 in · 1,250–2,100 mm |
| Rear track | 53.5–59.1 in · 1,360–1,500 mm |
Source · Traktorenlexikon, “John Deere-Lanz 700”
Which tractors compare with a 700?
Within 10% of its 49.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- ALLIS-CHALMERS FD-549.3 hp engine, claimed · 1963–1965Side by side with the 700 →
- IMT 55549.3 hp engine, claimed · 1964–1971Side by side with the 700 →
- Porsche-Diesel Master 40949.3 hp engine, claimed · 1962–1963Side by side with the 700 →
- John Deere-LANZ 71049.3 hp engine, claimed · 1965–1967Side by side with the 700 →
- SOMECA SOM-5049.3 hp engine, claimed · 1961–1963Side by side with the 700 →
- Fiat 50-R49.3 hp engine, claimed · 1958–1959Side by side with the 700 →
Everything else people ask
Is a 700 two-wheel drive or four-wheel drive?
The John Deere-LANZ 700 is two-wheel drive (2WD).
What PTO does a 700 have?
A 700 has a 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “John Deere-Lanz 700”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere-Lanz 700 — CC BY-SA 4.0, WIKIBOOKS-TL-29573 · revision 957528. Wikibooks contributors (Traktorenlexikon). Original document