IMT 555 vs John Deere-LANZ 710

10 material differences · fewer than 12

Tractor one

1964–1971

No measured PTO figure

Tractor two

1965–1967

No measured PTO figure

Which should you choose?

Read our verdict on the 555 and the 710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

IMT 555 and John Deere-LANZ 710, field by field
Field	555	710	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	IMR-PERKINS O-34/TA	John Deere 202 D 23 L	differs
Displacement declared	3.34 L	3.32 L	—
Maximum torque declared	141 lb·ft · 191 N·m	132 lb·ft · 178 N·m	+7% 555
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	Pedal operated dry two-stage double clutch	—	—
Hydraulics & hitch
Pump flow declared	4.0 gpm · 15.1 L/min	4.1 gpm · 15.6 L/min	—
Pressure declared	—	2,162 psi · 149 bar	—
Three-point lift at ends declared	2,601 lb · 1,180 kg	3,968 lb · 1,800 kg	+53% 710
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,123 lb · 1,870 kg	4,925 lb · 2,234 kg	+19% 710
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	84.8 in · 2,155 mm	86.6 in · 2,200 mm	—
Length declared	137.2 in · 3,485 mm	139.0 in · 3,530 mm	—
Width declared	66.9 in · 1,700 mm	70.5 in · 1,790 mm	+5% 710
Height declared	66.5 in · 1,690 mm	68.9 in · 1,750 mm	—
Ground clearance declared	23.9 in · 607 mm	19.7 in · 500 mm	+21% 555
Turning radius, braked declared	12.3 ft · 3.75 m	10.2 ft · 3.10 m	+21% 555
Fuel tank declared	47.6 qt · 45.0 L	74.0 qt · 70.0 L	+56% 710

Source

Source