John Deere-LANZ 700 vs John Deere-LANZ 710

7 material differences · fewer than 12

Tractor one

1963–1965

No measured PTO figure

Tractor two

1965–1967

No measured PTO figure

Which should you choose?

Read our verdict on the 700 and the 710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere-LANZ 700 and John Deere-LANZ 710, field by field
Field	700	710	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	John Deere 405	John Deere 202 D 23 L	differs
Displacement declared	2.71 L	3.32 L	+23% 710
Maximum torque declared	125 lb·ft · 170 N·m	132 lb·ft · 178 N·m	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	12.4–15.5 mph · 20–25 km/h	differs
Hydraulics & hitch
Pump flow declared	—	4.1 gpm · 15.6 L/min	—
Pressure declared	—	2,162 psi · 149 bar	—
Three-point lift at ends declared	—	3,968 lb · 1,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,071 lb · 2,300 kg	4,925 lb · 2,234 kg	—
Maximum permissible mass declared	7,716 lb · 3,500 kg	7,716 lb · 3,500 kg	—
Wheelbase declared	76.8 in · 1,950 mm	86.6 in · 2,200 mm	+13% 710
Length declared	133.5 in · 3,390 mm	139.0 in · 3,530 mm	—
Width declared	65.0 in · 1,650 mm	70.5 in · 1,790 mm	+8% 710
Height declared	62.4 in · 1,585 mm	68.9 in · 1,750 mm	+10% 710
Ground clearance declared	15.2 in · 385 mm	19.7 in · 500 mm	+30% 710
Turning radius, braked declared	—	10.2 ft · 3.10 m	—
Fuel tank declared	—	74.0 qt · 70.0 L	—

Source

Source