• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1962–1966
  • 2,367 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere-LANZ 100 Full specifications

John Deere 204 two-cylinder diesel. The manufacturer claimed 17.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

17.7 hp

13.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere-Lanz 100”, claimed

Weight
2,712 lb
Hyd. flow
1.8 gpm
Top speed
12.4 mph

John Deere-LANZ 100 specs: key facts

  • The John Deere-LANZ 100 was built from 1962 to 1966.

  • The John Deere-LANZ 100 has a claimed engine power (gross or net not stated) of 13.2 kW (17.7 hp); it has no measured PTO figure.

  • The John Deere-LANZ 100 is two-wheel drive (2WD).

  • The John Deere-LANZ 100 has a John Deere 204 engine, a 2-cylinder 1.18 L diesel unit.

  • The John Deere-LANZ 100 weighs 1,230 kg (2,712 lb) unladen.

  • The John Deere-LANZ 100 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the John Deere-LANZ 100 delivers 7.0 L/min (1.8 gpm).

Source · Traktorenlexikon, “John Deere-Lanz 100”

How much horsepower does a 100 have?

The only figure for the 100 is 17.7 hp (13.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
17.7 hp

Source · Traktorenlexikon, “John Deere-Lanz 100”

What engine is in a 100?

A 100 has a John Deere 204, a 2-cylinder 1.18 L diesel engine.

Engine — 100 engine specifications
Make & modelJohn Deere 204
Cylinders2, liquid-cooled
Displacement72.2 ci · 1.18 L
Electrical system12 V

Source · Traktorenlexikon, “John Deere-Lanz 100”

How much will a 100 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 100 are below.

Hydraulics & PTO — 100 hydraulics and PTO specifications
Pump flow1.8 gpm · 7.0 L/min
Hitch categoryCategory 1
Rear PTOtransmission-driven, 540/1000 rpmGround-speed PTO available

Source · Traktorenlexikon, “John Deere-Lanz 100”

What transmission does a 100 have?

Transmission specifications for the 100 are below.

Transmission — 100 transmission specifications
Clutchpedal-operated dry Fichtel and Sachs single-plate clutch
Brakespedal-operated double disc brake acting on differential final drives
Steeringmechanical spindle steering
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “John Deere-Lanz 100”

How much does a 100 weigh?

A 100 weighs 2,712 lb (1,230 kg) unladen.

Weights & dimensions — 100 weights and dimensions
Unladen weight2,712 lb · 1,230 kg
Maximum permissible mass4,409 lb · 2,000 kg
Wheelbase73.2 in · 1,860 mm
Length122.8 in · 3,120 mm
Width57.9 in · 1,470 mm
Height54.6 in · 1,388 mm
Ground clearance14.8 in · 375 mm
Front track47.7–57.5 in · 1,212–1,460 mm
Rear track49.2–59.1 in · 1,250–1,500 mm

Source · Traktorenlexikon, “John Deere-Lanz 100”

Which tractors compare with a 100?

Within 10% of its 17.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 100 two-wheel drive or four-wheel drive?

The John Deere-LANZ 100 is two-wheel drive (2WD).

What PTO does a 100 have?

A 100 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “John Deere-Lanz 100”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere-Lanz 100CC BY-SA 4.0, WIKIBOOKS-TL-29521 · revision 957524. Wikibooks contributors (Traktorenlexikon). Original document