John Deere-LANZ 100 vs SOMECA SOM-20 D

11 material differences · fewer than 12

Tractor one

1962–1966

No measured PTO figure

Tractor two

1956–1961

No measured PTO figure

Which should you choose?

Read our verdict on the 100 and the SOM-20 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere-LANZ 100 and SOMECA SOM-20 D, field by field
Field	100	SOM-20 D	Gap
Engine
Engine power, claimed claimed	17.7 hp	17.7 hp	—
Engine declared	John Deere 204	FIAT 614.000	differs
Displacement declared	1.18 L	1.14 L	—
Maximum torque declared	—	43 lb·ft · 58.8 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	13.0 mph · 21 km/h	—
Clutch declared	pedal-operated dry Fichtel and Sachs single-plate clutch	Pedal-operated dry FERODO single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	1.8 gpm · 7.0 L/min	2.0 gpm · 7.5 L/min	+7% SOM-20 D
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,712 lb · 1,230 kg	1,874 lb · 850 kg	+45% 100
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	73.2 in · 1,860 mm	66.9 in · 1,700 mm	+9% 100
Length declared	122.8 in · 3,120 mm	102.2 in · 2,595 mm	+20% 100
Width declared	57.9 in · 1,470 mm	47.6 in · 1,210 mm	+21% 100
Height declared	54.6 in · 1,388 mm	60.2 in · 1,530 mm	+10% SOM-20 D
Ground clearance declared	14.8 in · 375 mm	19.7 in · 500 mm	+33% SOM-20 D
Fuel tank declared	31.7 qt · 30.0 L	25.4 qt · 24.0 L	+25% 100

Source

Source