- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1977–1980
- 8,538 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 184 specs: hp, weight, years
INTERNATIONAL HARVESTER C-60 four-cylinder petrol. The manufacturer claimed 17.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
17.7 hp
13.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC International 184”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 1,618 lb
- Hyd. flow
- 2.0 gpm
- Top speed
- 7.5 mph
International Harvester 184 specs: key facts
The International Harvester 184 was built from 1977 to 1980.
The International Harvester 184 has a claimed engine power (gross or net not stated) of 13.2 kW (17.7 hp); it has no measured PTO figure.
The International Harvester 184 is two-wheel drive (2WD).
The International Harvester 184 has a INTERNATIONAL HARVESTER C-60 engine, a 4-cylinder 0.98 L petrol unit.Source 2
The International Harvester 184 weighs 734 kg (1,618 lb) unladen.
The International Harvester 184 has a rear PTO running at 1800 rpm.
The hydraulic pump of the International Harvester 184 delivers 7.6 L/min (2.0 gpm).
Source · Traktorenlexikon, “IHC International 184”
How does the 184 compare with its class?
- Limitation:
Three forward gears is low for its class — 40% below the median of 5 across the 51 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 734 kg is low for its class — 40% below the median of 1,230 kg across the 53 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 53 comparable records. How we work this out
How much horsepower does an 184 have?
The only figure for the 184 is 17.7 hp (13.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC International 184”
What engine is in an 184?
An 184 has an INTERNATIONAL HARVESTER C-60, a 4-cylinder 0.98 L petrol engine.
| Make & model | INTERNATIONAL HARVESTER C-60 |
|---|---|
| Cylinders | 4, liquid-cooledSource 1 |
| Displacement | 59.6 ci · 0.98 L |
| Electrical system | 12 VSource 1 |
Source · Traktorenlexikon, “McCormick Farmall Cub”
How much will an 184 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 184 are below.
| Pump flow | 2.0 gpm · 7.6 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | 1800 rpm |
| PTO shaft | 1 1/8"- 6 splines |
Source · Traktorenlexikon, “IHC International 184”
What transmission does an 184 have?
Transmission specifications for the 184 are below.
| Brakes | Internal shoe brakes mounted on the countershafts |
|---|---|
| Steering | Mechanical worm steering with center control |
| Top speed | 7.5 mph · 12 km/h |
Source · Traktorenlexikon, “IHC International 184”
How much does an 184 weigh?
An 184 weighs 1,618 lb (734 kg) unladen.
| Unladen weight | 1,618 lb · 734 kg |
|---|---|
| Wheelbase | 64.0 in · 1,626 mm |
| Length | 94.0 in · 2,388 mm |
| Width | 52.0 in · 1,321 mm |
| Height | 49.0 in · 1,245 mm |
| Ground clearance | 13.0 in · 330 mm |
| Front track | 42.0 in · 1,067 mmWikibooks gives one track for both axles |
| Rear track | 42.0 in · 1,067 mmWikibooks gives one track for both axles |
| Turning radius, braked | 8.0 ft · 2.44 m |
Source · Traktorenlexikon, “IHC International 184”
What oil does an 184 take, and how much?
An 184 engine takes 3.0 qt (2.8 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 3.0 qt · 2.8 LSource: Traktorenlexikon, “IHC International 184” · single source, not independently verified |
| Transmission | 7.0 qt · 6.6 LSource: Traktorenlexikon, “IHC International 184” · single source, not independently verified |
| Hydraulic | 7.0 qt · 6.6 LSource: Traktorenlexikon, “IHC International 184” · single source, not independently verified |
| Cooling system | 9.7 qt · 9.2 LSource: Traktorenlexikon, “IHC International 184” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with an 184?
Within 10% of its 17.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- Warchalowski WT-2117.7 hp engine, claimed · 1968–1969Side by side with the 184 →
- John Deere-LANZ 10017.7 hp engine, claimed · 1962–1966Side by side with the 184 →
- Ford 1220 (A)16.8 hp engine, claimed · 1987–1998Side by side with the 184 →
- Fendt Fix 2D16.8 hp engine, claimed · 1963–1967Side by side with the 184 →
- Ford 1310 (A)19 hp engine, claimed · 1983–1986Side by side with the 184 →
- Ford 1320 (A)19 hp engine, claimed · 1987–1998Side by side with the 184 →
Common questions about the International Harvester 184
Is an 184 two-wheel drive or four-wheel drive?
The International Harvester 184 is two-wheel drive (2WD).
What PTO does an 184 have?
An 184 has a 1800 rpm rear PTO on a 1 1/8"- 6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick Farmall Cub”; and Traktorenlexikon, “IHC International 184”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC International 184 — CC BY-SA 4.0, WIKIBOOKS-TL-118587 · revision 1031590. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick Farmall Cub — CC BY-SA 4.0, WIKIBOOKS-TL-117791 · revision 1078388. Wikibooks contributors (Traktorenlexikon). Original document