11 material differences · fewer than 12
Tractor oneFendt Fix 2 D1963–1967No measured PTO figureTractor twoInternational Harvester 1841977–1980No measured PTO figure
Which should you choose?
Read our verdict on the Fix 2 D and the 184 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | Fix 2 D | 184 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 16.8 hp | 17.7 hp | +6% 184 |
| Engine declared | MWM AKD 311 Z | INTERNATIONAL HARVESTER C-60 | differs |
| Displacement declared | 1.40 L | 0.98 L | +43% Fix 2 D |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 7.5 mph · 12 km/h | +67% Fix 2 D |
| Clutch declared | single-plate dry clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 2.9 gpm · 11.0 L/min | 2.0 gpm · 7.6 L/min | +45% Fix 2 D |
| Pressure declared | 2,134 psi · 147 bar | — | — |
| Rear PTO speeds declared | 570 rpm | 1800 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,789 lb · 1,265 kg | 1,618 lb · 734 kg | +72% Fix 2 D |
| Wheelbase declared | 68.9 in · 1,750 mm | 64.0 in · 1,626 mm | +8% Fix 2 D |
| Length declared | 113.8 in · 2,890 mm | 94.0 in · 2,388 mm | +21% Fix 2 D |
| Width declared | 59.8 in · 1,520 mm | 52.0 in · 1,321 mm | +15% Fix 2 D |
| Ground clearance declared | 15.7 in · 400 mm | 13.0 in · 330 mm | +21% Fix 2 D |
| Turning radius, braked declared | — | 8.0 ft · 2.44 m | — |
| Fuel tank declared | 31.7 qt · 30 L | 30.0 qt · 28.4 L | +6% Fix 2 D |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Fix 2 D sources
- Source: Traktorenlexikon, “Fendt Fix 2 D”
- Source: Traktorenlexikon, “Fendt Dieselross F17”
International Harvester 184 sources
- Source: Traktorenlexikon, “IHC International 184”
- Source: Traktorenlexikon, “McCormick Farmall Cub”