8 material differences · fewer than 12
Tractor oneALLIS-CHALMERS 2001972–1975No measured PTO figureTractor twoInternational Harvester 8061963–1967No measured PTO figure
Which should you choose?
Read our verdict on the 200 and the 806 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 200 | 806 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | ALLIS-CHALMERS D-2900 | INTERNATIONAL HARVESTER C-301 | differs |
| Displacement declared | 4.93 L | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 806 |
| Clutch declared | — | Pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 17.2 gpm · 65.1 L/min | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,845 lb · 4,012 kg | 8,459 lb · 3,837 kg | — |
| Wheelbase declared | 105.7 in · 2,686 mm | 91.0 in · 2,311 mm | +16% 200 |
| Length declared | 157.5 in · 4,000 mm | 161.0 in · 4,089 mm | — |
| Width declared | 87.6 in · 2,226 mm | 110.0 in · 2,794 mm | +26% 806 |
| Height, over the steering wheel declared | 86.7 in · 2,202 mm | 81.0 in · 2,057 mm | +7% 200 |
| Ground clearance declared | 21.4 in · 543 mm | 17.0 in · 432 mm | +26% 200 |
| Turning radius, braked declared | 11.1 ft · 3.38 m | — | — |
| Fuel tank declared | 192.0 qt · 181.7 L | 168.0 qt · 159.0 L | +14% 200 |
ALLIS-CHALMERS 200 sources
Source
- Source: Traktorenlexikon, “Allis-Chalmers 200”
- Source: Traktorenlexikon, “Allis-Chalmers 190XT”
International Harvester 806 sources
Source
- Source: Traktorenlexikon, “IHC 806”