9 material differences · fewer than 12
Tractor oneFord 6.500 (A)1968–1974No measured PTO figureTractor twoInternational Harvester 8061963–1967No measured PTO figure
Which should you choose?
Read our verdict on the 6.500 (A) and the 806 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 6.500 (A) | 806 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Ford 2703 E | INTERNATIONAL HARVESTER C-301 | differs |
| Displacement declared | 5.41 L | — | — |
| Maximum torque declared | 223 lb·ft · 303 N·m | — | — |
| Transmission | |||
| Top speed declared | 16.8 mph · 27 km/h | 18.6 mph · 30 km/h | +11% 806 |
| Clutch declared | — | Pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,826 lb · 3,550 kg | 8,459 lb · 3,837 kg | +8% 806 |
| Wheelbase declared | 100.4 in · 2,550 mm | 91.0 in · 2,311 mm | +10% 6.500 (A) |
| Length declared | 178.0 in · 4,520 mm | 161.0 in · 4,089 mm | +11% 6.500 (A) |
| Width declared | 79.9 in · 2,030 mm | 110.0 in · 2,794 mm | +38% 806 |
| Ground clearance declared | 21.3 in · 540 mm | 17.0 in · 432 mm | +25% 6.500 (A) |
| Turning radius, braked declared | 14.1 ft · 4.30 m | — | — |
| Fuel tank declared | 108.8 qt · 103.0 L | 168.0 qt · 159.0 L | +54% 806 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 6.500 (A) sources
- Source: Traktorenlexikon, “Ford 6500”
- Source: Traktorenlexikon, “Ford County Super 6/954”
International Harvester 806 sources
- Source: Traktorenlexikon, “IHC 806”