- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1973–1978
- 10,476 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 464 specs: hp, weight, years
INTERNATIONAL-HARVESTER D-179 three-cylinder diesel. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 464”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,130 lb
- 3-point lift
- 3,307 lb
- Hyd. flow
- 12.0 gpm
- Top speed
- 22.4 mph
International Harvester 464 specs: key facts
The International Harvester 464 was built from 1973 to 1978.
The International Harvester 464 has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.
The International Harvester 464 is two-wheel drive (2WD).
The International Harvester 464 has a INTERNATIONAL-HARVESTER D-179 engine, a 3-cylinder 2.93 L diesel unit.Source 2
The International Harvester 464 weighs 2,327 kg (5,130 lb) unladen.
The International Harvester 464 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the International Harvester 464 lifts 1,500 kg (3,307 lb) at the lower-link ends.
The hydraulic pump of the International Harvester 464 delivers 45.4 L/min (12.0 gpm).
Source · Traktorenlexikon, “IHC 464”
How does the 464 compare with its class?
- Strength:
A hydraulic pump flow of 45.4 L/min is high for its class — 94% above the median of 23.4 L/min across the 210 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 272 comparable records. How we work this out
How much horsepower does a 464 have?
The only figure for the 464 is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 464”
What engine is in a 464?
A 464 has an INTERNATIONAL-HARVESTER D-179, a 3-cylinder 2.93 L diesel engine.
| Make & model | INTERNATIONAL-HARVESTER D-179Source 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 179.0 ci · 2.93 LSource 2 |
| Max torque | 132 lb·ft · 179 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 464”
How much will a 464 lift, and what is its hydraulic flow?
A 464 lifts 3,307 lb (1,500 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 12.0 gpm · 45.4 L/min |
|---|---|
| Hitch category | Category 1 |
| Lift at ends | 3,307 lb · 1,500 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,142 engine rpmEngages under load |
Source · Traktorenlexikon, “IHC 464”
What transmission does a 464 have?
Transmission specifications for the 464 are below.
| Steering | Hydrostatic ROSS steering |
|---|---|
| Top speed | 22.4 mph · 36 km/h |
Source · Traktorenlexikon, “IHC 464”
How much does a 464 weigh?
A 464 weighs 5,130 lb (2,327 kg) unladen.
| Unladen weight | 5,130 lb · 2,327 kg |
|---|---|
| Wheelbase | 75.2 in · 1,910 mm |
| Length | 133.0 in · 3,378 mm |
| Width | 66.0 in · 1,676 mm |
| Height | 55.0 in · 1,397 mm |
| Ground clearance | 12.4 in · 315 mm |
| Front track | 48.0–80.0 in · 1,219–2,032 mm |
| Rear track | 52.0–76.0 in · 1,321–1,930 mm |
| Turning radius, braked | 9.2 ft · 2.79 m |
Source · Traktorenlexikon, “IHC 464”
What oil does a 464 take, and how much?
A 464 engine takes 6.9 qt (6.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.9 qt · 6.5 LSource: Traktorenlexikon, “IHC 464” · single source, not independently verified |
| Transmission | 36.0 qt · 34.1 LSource: Traktorenlexikon, “IHC 464” · single source, not independently verified |
| Cooling system | 12.5 qt · 11.8 LSource: Traktorenlexikon, “IHC 464” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 464?
Within 10% of its 41.7 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- Fendt Farmer 201S42 hp PTO, claimed · 1975–1987Side by side with the 464 →
- Hürlimann D-65 Spezial41.5 hp PTO, claimed · 1958–1966Side by side with the 464 →
- Hürlimann D-70 Super-Spezial41.5 hp PTO, claimed · 1958–1966Side by side with the 464 →
- SAME Minitauro 5041.9 hp PTO, claimed · 1967–1972Side by side with the 464 →
- J.I. Case 610-B41.1 hp PTO, claimed · 1958–1959Side by side with the 464 →
- J.I. Case 611-B41.1 hp PTO, claimed · 1958–1959Side by side with the 464 →
Common questions about the International Harvester 464
Is a 464 two-wheel drive or four-wheel drive?
The International Harvester 464 is two-wheel drive (2WD).
What PTO does a 464 have?
A 464 has a independent 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick 523”; and Traktorenlexikon, “IHC 464”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 464 — CC BY-SA 4.0, WIKIBOOKS-TL-118806 · revision 1034319. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 523 — CC BY-SA 4.0, WIKIBOOKS-TL-118107 · revision 1059859. Wikibooks contributors (Traktorenlexikon). Original document