• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1958–1959
  • 744 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 610-B Full specifications

CASE 164 four-cylinder petrol. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

44.4 hp

33.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 610-B”, claimed

Weight
4,008 lb
Hyd. flow
3.0 gpm
Top speed
12.4–15.5 mph

J.I. Case 610-B specs: key facts

  • The J.I. Case 610-B was built from 1958 to 1959.

  • The J.I. Case 610-B has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.

  • The J.I. Case 610-B is two-wheel drive (2WD).

  • The J.I. Case 610-B has a CASE 164 engine, a 4-cylinder 2.70 L petrol unit.Source 1

  • The J.I. Case 610-B weighs 1,818 kg (4,008 lb) unladen.

  • The J.I. Case 610-B has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the J.I. Case 610-B delivers 11.4 L/min (3.0 gpm).

Source · Traktorenlexikon, “Case 610-B”

How much horsepower does a 610-B have?

The only figure for the 610-B is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
44.4 hp

Source · Traktorenlexikon, “Case 610-B”

What engine is in a 610-B?

A 610-B has a CASE 164, a 4-cylinder 2.70 L petrol engine.

Engine — 610-B engine specifications
Make & modelCASE 164
Cylinders4, liquid-cooledSource 2
Displacement164.5 ci · 2.70 L
Electrical system12 VSource 2

Source · Traktorenlexikon, “Case 511-B”

How much will a 610-B lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 610-B are below.

Hydraulics & PTO — 610-B hydraulics and PTO specifications
Pump flow3.0 gpm · 11.4 L/min
Rear PTODependent, transmission-driven, 540 rpm @ 1,950 engine rpm

Source · Traktorenlexikon, “Case 610-B”

What transmission does a 610-B have?

Transmission specifications for the 610-B are below.

Transmission — 610-B transmission specifications
ClutchPedal-operated CASE single-plate clutch, in conjunction with pedal valve-operated torque converter
SteeringMechanical worm gear steering with hydraulic power steering
Top speed12.4–15.5 mph · 20–25 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 610-B”

How much does a 610-B weigh?

A 610-B weighs 4,008 lb (1,818 kg) unladen.

Weights & dimensions — 610-B weights and dimensions
Unladen weight4,008 lb · 1,818 kg
Wheelbase78.5 in · 1,994 mm
Length121.5 in · 3,086 mm
Width63.3 in · 1,608 mm
Height63.4 in · 1,610 mm
Front track52.0 in · 1,321 mm
Rear track48.0–86.0 in · 1,219–2,184 mm

Source · Traktorenlexikon, “Case 610-B”

Which tractors compare with a 610-B?

Within 10% of its 41.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 610-B two-wheel drive or four-wheel drive?

The J.I. Case 610-B is two-wheel drive (2WD).

What PTO does a 610-B have?

A 610-B has a dependent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 511-B”; and Traktorenlexikon, “Case 610-B”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 511-BCC BY-SA 4.0, WIKIBOOKS-TL-115260 · revision 970630. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case 610-BCC BY-SA 4.0, WIKIBOOKS-TL-115264 · revision 989823. Wikibooks contributors (Traktorenlexikon). Original document