11 material differences · fewer than 12
Tractor oneInternational Harvester 4641973–1978No measured PTO figureTractor twoSAME Minitauro 501967–1972No measured PTO figure
Which should you choose?
Read our verdict on the 464 and the Minitauro 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 464 | Minitauro 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 47.3 hp | +7% Minitauro 50 |
| Engine declared | INTERNATIONAL-HARVESTER D-179 | SAME DA 029-953 L | differs |
| Displacement declared | 2.93 L | 2.55 L | +15% 464 |
| Maximum torque declared | 132 lb·ft · 179 N·m | 116 lb·ft · 157 N·m | +14% 464 |
| Transmission | |||
| Top speed declared | 22.4 mph · 36 km/h | 15.5 mph · 25 km/h | +44% 464 |
| Clutch declared | — | Pedal operated dry two-stage double clutch with coil springs | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 4.3 gpm · 16.1 L/min | +182% 464 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,130 lb · 2,327 kg | 3,858 lb · 1,750 kg | +33% 464 |
| Wheelbase declared | 75.2 in · 1,910 mm | 77.6 in · 1,970 mm | — |
| Length declared | 133.0 in · 3,378 mm | 128.7 in · 3,270 mm | — |
| Width declared | 66.0 in · 1,676 mm | 60.2–87.8 in · 1,530–2,230 mm | differs |
| Ground clearance declared | 12.4 in · 315 mm | 13.4 in · 340 mm | +8% Minitauro 50 |
| Turning radius, braked declared | 9.2 ft · 2.79 m | 9.6 ft · 2.94 m | +5% Minitauro 50 |
| Fuel tank declared | 74.0 qt · 70.0 L | 52.8 qt · 50.0 L | +40% 464 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 464 sources
- Source: Traktorenlexikon, “IHC 464”
- Source: Traktorenlexikon, “McCormick 523”
SAME Minitauro 50 sources
- Source: Traktorenlexikon, “SAME Minitauro 50”