WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1958–1959
  • 3,213 built

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

J.I. Case 611-B Full specifications

CASE 164 four-cylinder petrol. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

44.4 hp

33.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 611-B”, claimed

Weight
4,885 lb
Hyd. flow
3.0 gpm
Top speed
12.4–18.6 mph

J.I. Case 611-B specs: key facts

  • The J.I. Case 611-B was built from 1958 to 1959.

  • The J.I. Case 611-B has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.

  • The J.I. Case 611-B is two-wheel drive (2WD).

  • The J.I. Case 611-B has a CASE 164 engine, a 4-cylinder 2.70 L petrol unit.Source 1

  • The J.I. Case 611-B weighs 2,216 kg (4,885 lb) unladen.

  • The J.I. Case 611-B has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the J.I. Case 611-B delivers 11.4 L/min (3.0 gpm).

Source · Traktorenlexikon, “Case 611-B”

How much horsepower does a 611-B have?

The only figure for the 611-B is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
44.4 hp

Source · Traktorenlexikon, “Case 611-B”

What engine is in a 611-B?

A 611-B has a CASE 164, a 4-cylinder 2.70 L petrol engine.

Engine — 611-B engine specifications
Make & modelCASE 164
Cylinders4, liquid-cooledSource 2
Displacement164.5 ci · 2.70 L
Electrical system12 VSource 2

Source · Traktorenlexikon, “Case 511-B”

How much will a 611-B lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 611-B are below.

Hydraulics & PTO — 611-B hydraulics and PTO specifications
Pump flow3.0 gpm · 11.4 L/min
Rear PTODependent, transmission-driven, 540 rpm @ 1,950 engine rpm

Source · Traktorenlexikon, “Case 611-B”

What transmission does a 611-B have?

Transmission specifications for the 611-B are below.

Transmission — 611-B transmission specifications
Steeringmechanical worm gear steering with hydraulic power steering assistance
Top speed12.4–18.6 mph · 20–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 611-B”

How much does a 611-B weigh?

A 611-B weighs 4,885 lb (2,216 kg) unladen.

Weights & dimensions — 611-B weights and dimensions
Unladen weight4,885 lb · 2,216 kg
Wheelbase87.0 in · 2,210 mm
Length138.0 in · 3,505 mm
Width80.7 in · 2,051 mm
Height65.5 in · 1,664 mm
Rear track52.0–88.0 in · 1,321–2,235 mm
Turning radius, braked8.1 ft · 2.46 m

Source · Traktorenlexikon, “Case 611-B”

Which tractors compare with a 611-B?

Within 10% of its 41.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 611-B two-wheel drive or four-wheel drive?

The J.I. Case 611-B is two-wheel drive (2WD).

What PTO does a 611-B have?

A 611-B has a dependent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 511-B”; and Traktorenlexikon, “Case 611-B”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 511-B — CC BY-SA 4.0, WIKIBOOKS-TL-115260 · revision 970630. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case 611-B — CC BY-SA 4.0, WIKIBOOKS-TL-115263 · revision 989824. Wikibooks contributors (Traktorenlexikon). Original document