10 material differences · fewer than 12
Tractor oneHürlimann D-70 Super-Spezial1958–1966No measured PTO figureTractor twoInternational Harvester 4641973–1978No measured PTO figure
Which should you choose?
Read our verdict on the D-70 Super-Spezial and the 464 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D-70 Super-Spezial | 464 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 42.4 hp | 44.4 hp | — |
| Engine declared | Hürlimann D-70 DS | INTERNATIONAL-HARVESTER D-179 | differs |
| Displacement declared | 2.65 L | 2.93 L | +11% 464 |
| Maximum torque declared | 115 lb·ft · 156 N·m | 132 lb·ft · 179 N·m | +15% 464 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 22.4 mph · 36 km/h | +80% 464 |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.4 L/min | — |
| Pressure declared | 640 psi · 44 bar | — | — |
| Three-point lift, at the coupling points declared | 2,425 lb · 1,100 kg | 3,307 lb · 1,500 kg | +36% 464 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 5,130 lb · 2,327 kg | +52% 464 |
| Wheelbase declared | 67.3 in · 1,710 mm | 75.2 in · 1,910 mm | +12% 464 |
| Length declared | 113.4 in · 2,880 mm | 133.0 in · 3,378 mm | +17% 464 |
| Width declared | 64.2 in · 1,630 mm | 66.0 in · 1,676 mm | — |
| Ground clearance declared | 12.8 in · 325 mm | 12.4 in · 315 mm | — |
| Turning radius, braked declared | 7.8 ft · 2.38 m | 9.2 ft · 2.79 m | +17% 464 |
| Fuel tank declared | — | 74.0 qt · 70.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D-70 Super-Spezial sources
- Source: Traktorenlexikon, “Hürlimann D 70 SSP”
International Harvester 464 sources
- Source: Traktorenlexikon, “IHC 464”
- Source: Traktorenlexikon, “McCormick 523”