5 material differences · fewer than 12

Tractor oneFendt Farmer 201 S1975–1987No measured PTO figureTractor twoInternational Harvester 4641973–1978No measured PTO figure

Which should you choose?

Read our verdict on the Farmer 201 S and the 464 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 5 fields identical or within 5%, which is not counted as material

Fendt Farmer 201 S and International Harvester 464, field by field
FieldFarmer 201 S464Gap
Engine
Engine power, claimed claimed—44.4 hp—
Engine declaredKHD F3L 912INTERNATIONAL-HARVESTER D-179differs
Displacement declared2.83 L2.93 L—
Maximum torque declared129 lb·ft · 175 N·m132 lb·ft · 179 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h22.4 mph · 36 km/h+20% 464
Clutch declaredAir-cooled dual clutch——
Hydraulics & hitch
Pump flow declared—12.0 gpm · 45.4 L/min—
Rear PTO speeds declared1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared4,442 lb · 2,015 kg5,130 lb · 2,327 kg+15% 464
Wheelbase declared77.5 in · 1,968 mm75.2 in · 1,910 mm—
Length declared136.2 in · 3,460 mm133.0 in · 3,378 mm—
Width declared67.1 in · 1,705 mm66.0 in · 1,676 mm—
Ground clearance declared15.7 in · 400 mm12.4 in · 315 mm+27% Farmer 201 S
Turning radius, braked declared—9.2 ft · 2.79 m—
Fuel tank declared—74.0 qt · 70.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Farmer 201 S sources

Source
  • Source: Traktorenlexikon, “Deutz D 4006 P”
  • Source: Traktorenlexikon, “Fendt Farmer 201 S”

International Harvester 464 sources

Source
  • Source: Traktorenlexikon, “IHC 464”
  • Source: Traktorenlexikon, “McCormick 523”