• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1976–1977

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

International Harvester 364 Full specifications

INTERNATIONAL HARVESTER BD-154 four-cylinder diesel. The manufacturer claimed 35.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

35.5 hp

26.5 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 364”, claimed

Weight
3,948 lb
Hyd. flow
7.2 gpm
Top speed
15.5 mph

International Harvester 364 specs: key facts

  • The International Harvester 364 was built from 1976 to 1977.

  • The International Harvester 364 has a claimed engine power (gross or net not stated) of 26.5 kW (35.5 hp); it has no measured PTO figure.

  • The International Harvester 364 is two-wheel drive (2WD).

  • The International Harvester 364 has a INTERNATIONAL HARVESTER BD-154 engine, a 4-cylinder 2.52 L diesel unit.Source 2

  • The International Harvester 364 weighs 1,791 kg (3,948 lb) unladen.

  • The International Harvester 364 has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the International Harvester 364 delivers 27.3 L/min (7.2 gpm).

Source · Traktorenlexikon, “IHC 364”

How much horsepower does a 364 have?

The only figure for the 364 is 35.5 hp (26.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
35.5 hp

Source · Traktorenlexikon, “IHC 364”

What engine is in a 364?

A 364 has an INTERNATIONAL HARVESTER BD-154, a 4-cylinder 2.52 L diesel engine.

Engine — 364 engine specifications
Make & modelINTERNATIONAL HARVESTER BD-154Source 2
Cylinders4, liquid-cooledSource 2
Displacement154.0 ci · 2.52 LSource 2
Max torque116 lb·ft · 157 N·m @ 1,300 rpm
Electrical system12 V

Source · Traktorenlexikon, “IHC 364”

How much will a 364 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 364 are below.

Hydraulics & PTO — 364 hydraulics and PTO specifications
Pump flow7.2 gpm · 27.3 L/min
Hitch categoryCategory 1
Rear PTOIndependent, 540 rpm @ 1,980 engine rpm

Source · Traktorenlexikon, “IHC 364”

What transmission does a 364 have?

Transmission specifications for the 364 are below.

Transmission — 364 transmission specifications
SteeringHydraulic steering
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “IHC 364”

How much does a 364 weigh?

A 364 weighs 3,948 lb (1,791 kg) unladen.

Weights & dimensions — 364 weights and dimensions
Unladen weight3,948 lb · 1,791 kg
Wheelbase76.5 in · 1,943 mm
Length126.0 in · 3,200 mm
Width65.0 in · 1,651 mm
Height59.0 in · 1,499 mm
Ground clearance18.5 in · 470 mm
Front track53.0–77.0 in · 1,346–1,956 mm
Rear track52.0–80.0 in · 1,321–2,032 mm
Turning radius, braked8.2 ft · 2.49 m

Source · Traktorenlexikon, “IHC 364”

Which tractors compare with a 364?

Within 10% of its 35.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 364 two-wheel drive or four-wheel drive?

The International Harvester 364 is two-wheel drive (2WD).

What PTO does a 364 have?

A 364 has a independent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “McCormick B-414”; and Traktorenlexikon, “IHC 364”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 364CC BY-SA 4.0, WIKIBOOKS-TL-118804 · revision 1034268. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick B-414CC BY-SA 4.0, WIKIBOOKS-TL-117936 · revision 1059867. Wikibooks contributors (Traktorenlexikon). Original document