7 material differences · fewer than 12

Tractor oneInternational Harvester 3641976–1977No measured PTO figureTractor twoSteyr 1901964–1966No measured PTO figure

Which should you choose?

Read our verdict on the 364 and the 190 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester 364 and Steyr 190, field by field
Field364190Gap
Engine
Engine power, claimed claimed35.5 hp35.5 hp—
Engine declaredINTERNATIONAL HARVESTER BD-154Steyr WD-306differs
Displacement declared2.52 L2.26 L+11% 364
Maximum torque declared116 lb·ft · 157 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h18.6 mph · 30 km/h+20% 190
Hydraulics & hitch
Pump flow declared7.2 gpm · 27.3 L/min——
Pressure declared—2,134 psi · 147 bar—
Rear PTO speeds declared540 rpm587 rpmdiffers
Weight & dimensions
Unladen weight declared3,948 lb · 1,791 kg3,726 lb · 1,690 kg+6% 364
Wheelbase declared76.5 in · 1,943 mm73.6 in · 1,870 mm—
Length declared126.0 in · 3,200 mm127.4 in · 3,235 mm—
Width declared65.0 in · 1,651 mm64.6 in · 1,640 mm—
Ground clearance declared18.5 in · 470 mm13.0 in · 330 mm+42% 364
Turning radius, braked declared8.2 ft · 2.49 m15.1 ft · 4.60 m+85% 190
Fuel tank declared56.0 qt · 53.0 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester 364 sources

Source
  • Source: Traktorenlexikon, “IHC 364”
  • Source: Traktorenlexikon, “McCormick B-414”

Steyr 190 sources

Source
  • Source: Traktorenlexikon, “Steyr 190”