- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1962
- 326 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Güldner G 40 (Toledo) Full specifications
Güldner 3 L 79 three-cylinder diesel. The manufacturer claimed 35.34 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
35.34 hp
26.35 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Güldner G 40 Toledo”, claimed
- Weight
- 4,442 lb
- 3-point lift
- 3,748 lb
- Hyd. flow
- 4.2 gpm
- Top speed
- 12.4–18.6 mph
Güldner G 40 (Toledo) specs: key facts
The Güldner G 40 (Toledo) was built in 1962.
The Güldner G 40 (Toledo) has a claimed engine power (gross or net not stated) of 26.35 kW (35.34 hp); it has no measured PTO figure.
The Güldner G 40 (Toledo) is two-wheel drive (2WD).
The Güldner G 40 (Toledo) has a Güldner 3 L 79 engine, a 3-cylinder 2.36 L diesel unit.
The Güldner G 40 (Toledo) weighs 2,015 kg (4,442 lb) unladen.
The Güldner G 40 (Toledo) has an independent rear PTO running at 540/1150 rpm.
The three-point hitch of the Güldner G 40 (Toledo) lifts 1,700 kg (3,748 lb) at the lower-link ends.
The hydraulic pump of the Güldner G 40 (Toledo) delivers 16.0 L/min (4.2 gpm).
Source · Traktorenlexikon, “Güldner G 40 Toledo”
How much horsepower does a G 40 (Toledo) have?
The only figure for the G 40 (Toledo) is 35.34 hp (26.35 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Güldner G 40 Toledo”
What engine is in a G 40 (Toledo)?
A G 40 (Toledo) has a Güldner 3 L 79, a 3-cylinder 2.36 L diesel engine.
| Make & model | Güldner 3 L 79 |
|---|---|
| Cylinders | 3, air-cooled |
| Displacement | 143.8 ci · 2.36 L |
| Max torque | 95 lb·ft · 128 N·m |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Güldner G 40 Toledo”
How much will a G 40 (Toledo) lift, and what is its hydraulic flow?
A G 40 (Toledo) lifts 3,748 lb (1,700 kg) at the lower-link ends.
| Pump flow | 4.2 gpm · 16.0 L/min |
|---|---|
| Pressure | 2,489 psi · 172 bar |
| Lift at ends | 3,748 lb · 1,700 kg |
| Rear PTO | Independent, engine-driven, 540/1150 rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm (Form-A) |
Source · Traktorenlexikon, “Güldner G 40 Toledo”
What transmission does a G 40 (Toledo) have?
Transmission specifications for the G 40 (Toledo) are below.
| Clutch | Foot-operated dry double clutch |
|---|---|
| Steering | ZF Gemmer steering with needle-bearing steering shafts |
| Top speed | 12.4–18.6 mph · 20–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Güldner G 40 Toledo”
How much does a G 40 (Toledo) weigh?
A G 40 (Toledo) weighs 4,442 lb (2,015 kg) unladen.
| Unladen weight | 4,442 lb · 2,015 kg |
|---|---|
| Maximum permissible mass | 4,526 lb · 2,053 kg |
| Wheelbase | 76.9 in · 1,954 mm |
| Length | 120.9 in · 3,070 mm |
| Width | 61.9 in · 1,572 mm |
| Height | 58.5 in · 1,485 mm |
| Ground clearance | 15.7 in · 400 mm |
| Front track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Rear track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Turning radius, braked | 9.8 ft · 3.00 m |
Source · Traktorenlexikon, “Güldner G 40 Toledo”
Which tractors compare with a G 40 (Toledo)?
Within 10% of its 35.34 hp of claimed engine power, the same type, and first built within 15 years of it.
- Ford 2000 (USA)35.3 hp engine, claimed · 1962–1965Side by side with the G 40 (Toledo) →
- International Harvester B-41435.5 hp engine, claimed · 1961–1966Side by side with the G 40 (Toledo) →
- Steyr 19035.5 hp engine, claimed · 1964–1966Side by side with the G 40 (Toledo) →
- Renault 36135.5 hp engine, claimed · 1972–1977Side by side with the G 40 (Toledo) →
- RÖHR R 3535.5 hp engine, claimed · 1949Side by side with the G 40 (Toledo) →
- International Harvester 36435.5 hp engine, claimed · 1976–1977Side by side with the G 40 (Toledo) →
Everything else people ask
Is a G 40 (Toledo) two-wheel drive or four-wheel drive?
The Güldner G 40 (Toledo) is two-wheel drive (2WD).
What PTO does a G 40 (Toledo) have?
A G 40 (Toledo) has a independent 540/1150 rpm rear PTO on a 29 x 34,9 x 8,7 mm (Form-A) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Güldner G 40 Toledo”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Güldner G 40 Toledo — CC BY-SA 4.0, WIKIBOOKS-TL-43394 · revision 1078737. Wikibooks contributors (Traktorenlexikon). Original document