9 material differences · fewer than 12
Tractor oneInternational Harvester 2761968–1974No measured PTO figureTractor twoNuffield 10/421964–1967No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (42%); they were not built in overlapping years (1968–1974; 1964–1967). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 276 | 10/42 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 35.5 hp | 42.6 hp | +20% 10/42 |
| Engine declared | INTERNATIONAL HARVESTER BD-144 A | BMC 28 TA | differs |
| Displacement declared | 2.35 L | 2.83 L | +21% 10/42 |
| Maximum torque declared | 97 lb·ft · 132 N·m | 125 lb·ft · 169 N·m | +28% 10/42 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal-operated two-stage dry BORG & BECK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.6 gpm · 25.0 L/min | 9.2 gpm · 35.0 L/min | +40% 10/42 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,741 lb · 1,697 kg | 5,331 lb · 2,418 kg | +42% 10/42 |
| Wheelbase declared | 76.5 in · 1,943 mm | 73.0 in · 1,854 mm | — |
| Length declared | 121.3 in · 3,080 mm | 115.0 in · 2,921 mm | +5% 276 |
| Width declared | 74.0 in · 1,880 mm | 67.7 in · 1,720 mm | +9% 276 |
| Ground clearance declared | 13.7 in · 349 mm | 12.6 in · 320 mm | +9% 276 |
| Turning radius, braked declared | 10.4 ft · 3.16 m | 10.3 ft · 3.15 m | — |
| Fuel tank declared | 51.0 qt · 48.3 L | 67.2 qt · 63.6 L | +32% 10/42 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 276 sources
- Source: Traktorenlexikon, “McCormick 276”
- Source: Traktorenlexikon, “IHC 276”
Nuffield 10/42 sources
- Source: Traktorenlexikon, “Nuffield 10/42 (1964-1967)”
- Source: Traktorenlexikon, “Nuffield 3/42 (1961-1963)”