• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1968–1973
  • 7,150 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

International Harvester 544 Full specifications

INTERNATIONAL HARVESTER C-200 four-cylinder. The manufacturer claimed 51.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

51.2 hp

38.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 544”, claimed

Weight
4,978 lb
Hyd. flow
12.0 gpm
Top speed
18.6 mph

International Harvester 544 specs: key facts

  • The International Harvester 544 was built from 1968 to 1973.

  • The International Harvester 544 has a claimed engine power (gross or net not stated) of 38.2 kW (51.2 hp); it has no measured PTO figure.

  • The International Harvester 544 is two-wheel drive (2WD).

  • The International Harvester 544 has a INTERNATIONAL HARVESTER C-200 engine, a 4-cylinder unit.

  • The International Harvester 544 weighs 2,258 kg (4,978 lb) unladen.

  • The International Harvester 544 has a dependent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the International Harvester 544 delivers 45.4 L/min (12.0 gpm).

Source · Traktorenlexikon, “IHC 544”

How much horsepower does a 544 have?

The only figure for the 544 is 51.2 hp (38.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
51.2 hp

Source · Traktorenlexikon, “IHC 544”

What engine is in a 544?

A 544 has an INTERNATIONAL HARVESTER C-200, a 4-cylinder engine.

Engine — 544 engine specifications
Make & modelINTERNATIONAL HARVESTER C-200
Cylinders4, liquid-cooled
Max torque171 lb·ft · 232 N·m @ 1,600 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “IHC 544”

How much will a 544 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 544 are below.

Hydraulics & PTO — 544 hydraulics and PTO specifications
Pump flow12.0 gpm · 45.4 L/min
Rear PTODependent, transmission-driven, 540/1000 rpm @ 1,988 engine rpm

Source · Traktorenlexikon, “IHC 544”

What transmission does a 544 have?

Transmission specifications for the 544 are below.

Transmission — 544 transmission specifications
ClutchPedal operated dry single plate clutch type 11 inches
SteeringHydraulic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “IHC 544”

How much does a 544 weigh?

A 544 weighs 4,978 lb (2,258 kg) unladen.

Weights & dimensions — 544 weights and dimensions
Unladen weight4,978 lb · 2,258 kgF: 2,766
Wheelbase73.0 in · 1,854 mmF: 2,299
Length138.0 in · 3,505 mm
Width71.0 in · 1,803 mm
Height62.0 in · 1,575 mm
Ground clearance11.0 in · 279 mmF: 330
Front track53.0–77.0 in · 1,346–1,956 mmF: 203-406
Rear track52.0–80.0 in · 1,321–2,032 mmF: 1,372-2,438
Turning radius, braked10.5 ft · 3.20 mF: 2,642

Source · Traktorenlexikon, “IHC 544”

Which tractors compare with a 544?

Within 10% of its 51.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 544 two-wheel drive or four-wheel drive?

The International Harvester 544 is two-wheel drive (2WD).

What PTO does a 544 have?

A 544 has a dependent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “IHC 544”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 544CC BY-SA 4.0, WIKIBOOKS-TL-118745 · revision 1055425. Wikibooks contributors (Traktorenlexikon). Original document