11 material differences · fewer than 12
Tractor oneInternational Harvester Farmall 5441968–1973No measured PTO figureTractor twoLandini R-5000 Special (TL 14 N/A)1968–1974No measured PTO figure
Which should you choose?
Read our verdict on the Farmall 544 and the R-5000 Special (TL 14 N/A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Farmall 544 | R-5000 Special (TL 14 N/A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.2 hp | 51.2 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-200 | Perkins AD 3.152 S | differs |
| Displacement declared | — | 2.50 L | — |
| Maximum torque declared | 171 lb·ft · 232 N·m | 122 lb·ft · 166 N·m | +40% Farmall 544 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 6.9 gpm · 26.2 L/min | +73% Farmall 544 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,098 lb · 2,766 kg | 4,167 lb · 1,890 kg | +46% Farmall 544 |
| Wheelbase declared | 90.5 in · 2,299 mm | 76.0 in · 1,930 mm | +19% Farmall 544 |
| Length declared | 138.0 in · 3,505 mm | 126.8 in · 3,220 mm | +9% Farmall 544 |
| Width declared | 71.0 in · 1,803 mm | 70.9–81.9 in · 1,800–2,080 mm | differs |
| Ground clearance declared | 13.0 in · 330 mm | 17.3 in · 440 mm | +33% R-5000 Special (TL 14 N/A) |
| Turning radius, braked declared | 8.7 ft · 2.64 m | 11.3 ft · 3.43 m | +30% R-5000 Special (TL 14 N/A) |
| Fuel tank declared | 132.1 qt · 125.0 L | 40.2 qt · 38.0 L | +229% Farmall 544 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Farmall 544 sources
- Source: Traktorenlexikon, “Farmall Farmall 544”
- Source: Traktorenlexikon, “IHC 544”
Landini R-5000 Special (TL 14 N/A) sources
- Source: Traktorenlexikon, “Landini 5000”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”