- Standard layout, Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1958–1962
- 18,231 built
It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester D-430 Standard Full specifications
INTERNATIONAL-HARVESTER DD-132 four-cylinder diesel. The manufacturer claimed 29.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
29.6 hp
22.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick D-430 Standard”, claimed
- Weight
- 3,402 lb
- 3-point lift
- 1,323 lb
- Hyd. flow
- 4.1 gpm
- Top speed
- 12.4 mph
International Harvester D-430 Standard specs: key facts
The International Harvester D-430 Standard was built from 1958 to 1962.
The International Harvester D-430 Standard has a claimed engine power (gross or net not stated) of 22.1 kW (29.6 hp); it has no measured PTO figure.
The International Harvester D-430 Standard is two-wheel drive (2WD).
The International Harvester D-430 Standard has a INTERNATIONAL-HARVESTER DD-132 engine, a 4-cylinder 2.18 L diesel unit.Source 2
The International Harvester D-430 Standard weighs 1,543 kg (3,402 lb) unladen.
The International Harvester D-430 Standard has an independent rear PTO running at 540 rpm.
The three-point hitch of the International Harvester D-430 Standard lifts 600 kg (1,323 lb) at the lower-link ends.
The hydraulic pump of the International Harvester D-430 Standard delivers 15.5 L/min (4.1 gpm).
Source · Traktorenlexikon, “McCormick D-430 Standard”
How much horsepower does a D-430 Standard have?
The only figure for the D-430 Standard is 29.6 hp (22.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “McCormick D-430 Standard”
What engine is in a D-430 Standard?
A D-430 Standard has an INTERNATIONAL-HARVESTER DD-132, a 4-cylinder 2.18 L diesel engine.
| Make & model | INTERNATIONAL-HARVESTER DD-132Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 132.9 ci · 2.18 LSource 2 |
| Max torque | 90 lb·ft · 122 N·m |
| Electrical system | 12 V |
Source · Traktorenlexikon, “McCormick D-430 Standard”
How much will a D-430 Standard lift, and what is its hydraulic flow?
A D-430 Standard lifts 1,323 lb (600 kg) at the lower-link ends.
| Pump flow | 4.1 gpm · 15.5 L/min |
|---|---|
| Lift at ends | 1,323 lb · 600 kg |
| Rear PTO | Independent, engine-driven, 540 rpm |
Source · Traktorenlexikon, “McCormick D-430 Standard”
What transmission does a D-430 Standard have?
Transmission specifications for the D-430 Standard are below.
| Clutch | Pedal-operated dry single-plate clutch from Fichtel & Sachs |
|---|---|
| Steering | Mechanically operated ZF-GEMMER steering |
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “McCormick D-430 Standard”
How much does a D-430 Standard weigh?
A D-430 Standard weighs 3,402 lb (1,543 kg) unladen.
| Unladen weight | 3,402 lb · 1,543 kg |
|---|---|
| Maximum permissible mass | 4,409 lb · 2,000 kg |
| Wheelbase | 74.0 in · 1,879 mm |
| Length | 115.4 in · 2,930 mm |
| Width | 64.6 in · 1,640 mm |
| Height | 61.0 in · 1,550 mm |
| Ground clearance | 15.2 in · 385 mm |
| Front track | 49.2–59.1 in · 1,250–1,500 mmthe article lists alternatives |
| Rear track | 49.2–74.8 in · 1,250–1,900 mm |
| Turning radius, braked | 8.7 ft · 2.65 m |
Source · Traktorenlexikon, “McCormick D-430 Standard”
Which tractors compare with a D-430 Standard?
Within 10% of its 29.6 hp of claimed engine power, the same type, and first built within 15 years of it.
- BUKH 302 (Super)29.6 hp engine, claimed · 1960–1967Side by side with the D-430 Standard →
- Renault D 3029.6 hp engine, claimed · 1956–1960Side by side with the D-430 Standard →
- Renault E 3029.6 hp engine, claimed · 1956–1958Side by side with the D-430 Standard →
- Hürlimann D 60 Spezial29.6 hp engine, claimed · 1955–1958Side by side with the D-430 Standard →
- Hürlimann D 80 SSP29.6 hp engine, claimed · 1955–1958Side by side with the D-430 Standard →
- International Harvester B-25029.6 hp engine, claimed · 1955–1961Side by side with the D-430 Standard →
Everything else people ask
Is a D-430 Standard two-wheel drive or four-wheel drive?
The International Harvester D-430 Standard is two-wheel drive (2WD).
What PTO does a D-430 Standard have?
A D-430 Standard has a independent 540 rpm rear PTO.
What serial numbers does a D-430 Standard carry?
The source prints serial numbers NT 250.001 to NT 268.235 for the FARMALL and STANDARD. It also records 4 changes by serial number. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.
Where this page comes from
Compiled from Traktorenlexikon, “McCormick DGD 4”; and Traktorenlexikon, “McCormick D-430 Standard”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: McCormick D-430 Standard — CC BY-SA 4.0, WIKIBOOKS-TL-73635 · revision 1022705. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick DGD 4 — CC BY-SA 4.0, WIKIBOOKS-TL-41177 · revision 1022333. Wikibooks contributors (Traktorenlexikon). Original document