International Harvester D-430 Standard vs Renault D 30

11 material differences · fewer than 12

Tractor one

1958–1962

No measured PTO figure

Tractor two

1956–1960

No measured PTO figure

Which should you choose?

Read our verdict on the D-430 Standard and the D 30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester D-430 Standard and Renault D 30, field by field
Field	D-430 Standard	D 30	Gap
Engine
Engine power, claimed claimed	29.6 hp	29.6 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-132	Perkins P 3 TA/4924	differs
Displacement declared	2.18 L	2.37 L	+9% D 30
Maximum torque declared	90 lb·ft · 122 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% D 30
Clutch declared	Pedal-operated dry single-plate clutch from Fichtel & Sachs	Pedal-operated dry FERODO single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	4.1 gpm · 15.5 L/min	3.2 gpm · 12.0 L/min	+29% D-430 Standard
Three-point lift at ends declared	1,323 lb · 600 kg	2,866 lb · 1,300 kg	+117% D 30
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,402 lb · 1,543 kg	3,274 lb · 1,485 kg	—
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	74.0 in · 1,879 mm	69.4 in · 1,762 mm	+7% D-430 Standard
Length declared	115.4 in · 2,930 mm	139.6 in · 3,546 mm	+21% D 30
Width declared	64.6 in · 1,640 mm	62.4 in · 1,584 mm	—
Height declared	61.0 in · 1,550 mm	60.0 in · 1,523 mm	—
Ground clearance declared	15.2 in · 385 mm	14.2 in · 360 mm	+7% D-430 Standard
Turning radius, braked declared	8.7 ft · 2.65 m	9.7 ft · 2.97 m	+12% D 30
Fuel tank declared	31.7–58.1 qt · 30.0–55.0 L	42.3 qt · 40.0 L	differs

Source

Source