12 material differences
Tractor oneInternational Harvester D-430 Standard1958–1962No measured PTO figureTractor twoPorsche-Diesel Standard Star 2191960–1962No measured PTO figure
Which should you choose?
Read our verdict on the D-430 Standard and the Standard Star 219 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D-430 Standard | Standard Star 219 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 29.6 hp | 29.6 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DD-132 | Porsche-Diesel F 219 | differs |
| Displacement declared | 2.18 L | 1.75 L | +24% D-430 Standard |
| Maximum torque declared | 90 lb·ft · 122 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 17.4 mph · 28 km/h | +40% Standard Star 219 |
| Clutch declared | Pedal-operated dry single-plate clutch from Fichtel & Sachs | Double clutch by Fichtel & Sachs and oil-hydraulic Voith flow coupling | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.1 gpm · 15.5 L/min | 4.4 gpm · 16.8 L/min | +8% Standard Star 219 |
| Rear PTO speeds declared | 540 rpm | 540 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,402 lb · 1,543 kg | 3,329–3,351 lb · 1,510–1,520 kg | — |
| Maximum permissible mass declared | 4,409 lb · 2,000 kg | 4,409 lb · 2,000 kg | — |
| Wheelbase declared | 74.0 in · 1,879 mm | 78.7 in · 2,000 mm | +6% Standard Star 219 |
| Length declared | 115.4 in · 2,930 mm | 136.6 in · 3,470 mm | +18% Standard Star 219 |
| Width declared | 64.6 in · 1,640 mm | 60.2–61.0 in · 1,530–1,550 mm | differs |
| Ground clearance declared | 15.2 in · 385 mm | 14.2 in · 360 mm | +7% D-430 Standard |
| Turning radius, braked declared | 8.7 ft · 2.65 m | 10.2 ft · 3.10 m | +17% Standard Star 219 |
| Fuel tank declared | 31.7–58.1 qt · 30.0–55.0 L | 44.4 qt · 42 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester D-430 Standard sources
- Source: Traktorenlexikon, “McCormick D-430 Standard”
- Source: Traktorenlexikon, “McCormick DGD 4”
Porsche-Diesel Standard Star 219 sources
- Source: Traktorenlexikon, “Porsche-Diesel Standard Star 219”