BUKH 302 (Super) vs International Harvester D-430 Standard

7 material differences · fewer than 12

Tractor one

1960–1967

No measured PTO figure

Tractor two

1958–1962

No measured PTO figure

Which should you choose?

Read our verdict on the 302 (Super) and the D-430 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

BUKH 302 (Super) and International Harvester D-430 Standard, field by field
Field	302 (Super)	D-430 Standard	Gap
Engine
Engine power, claimed claimed	29.6 hp	29.6 hp	—
Engine declared	BUKH 2 EV-100 or 2 G 105	INTERNATIONAL-HARVESTER DD-132	differs
Displacement declared	—	2.18 L	—
Maximum torque declared	—	90 lb·ft · 122 N·m	—
Transmission
Top speed declared	14.3 mph · 23 km/h	12.4 mph · 20 km/h	+15% 302 (Super)
Clutch declared	—	Pedal-operated dry single-plate clutch from Fichtel & Sachs	—
Hydraulics & hitch
Pump flow declared	4.2 gpm · 16.0 L/min	4.1 gpm · 15.5 L/min	—
Three-point lift at ends declared	2,425 lb · 1,100 kg	1,323 lb · 600 kg	+83% 302 (Super)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	3,699 lb · 1,678 kg	3,402 lb · 1,543 kg	+9% 302 (Super)
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	74.4 in · 1,890 mm	74.0 in · 1,879 mm	—
Length declared	116.7 in · 2,965 mm	115.4 in · 2,930 mm	—
Width declared	64.2 in · 1,630 mm	64.6 in · 1,640 mm	—
Height declared	60.6 in · 1,540 mm	61.0 in · 1,550 mm	—
Ground clearance declared	15.7 in · 400 mm	15.2 in · 385 mm	—
Turning radius, braked declared	8.2 ft · 2.50 m	8.7 ft · 2.65 m	+6% D-430 Standard
Fuel tank declared	37.0 qt · 35.0 L	31.7–58.1 qt · 30.0–55.0 L	differs

Source

Source