International Harvester D-430 Standard vs Renault E 30

9 material differences · fewer than 12

Tractor one

1958–1962

No measured PTO figure

Tractor two

1956–1958

No measured PTO figure

Which should you choose?

Read our verdict on the D-430 Standard and the E 30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester D-430 Standard and Renault E 30, field by field
Field	D-430 Standard	E 30	Gap
Engine
Engine power, claimed claimed	29.6 hp	29.6 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-132	RENAULT 668/12	differs
Displacement declared	2.18 L	2.00 L	+9% D-430 Standard
Maximum torque declared	90 lb·ft · 122 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% E 30
Clutch declared	Pedal-operated dry single-plate clutch from Fichtel & Sachs	Pedal-operated dry FERODO single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	4.1 gpm · 15.5 L/min	3.4 gpm · 13.0 L/min	+19% D-430 Standard
Three-point lift at ends declared	1,323 lb · 600 kg	2,866 lb · 1,300 kg	+117% E 30
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,402 lb · 1,543 kg	3,274 lb · 1,485 kg	—
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	74.0 in · 1,879 mm	69.8 in · 1,772 mm	+6% D-430 Standard
Length declared	115.4 in · 2,930 mm	123.2 in · 3,130 mm	+7% E 30
Width declared	64.6 in · 1,640 mm	61.8 in · 1,570 mm	—
Height declared	61.0 in · 1,550 mm	60.6 in · 1,540 mm	—
Ground clearance declared	15.2 in · 385 mm	14.6 in · 370 mm	—
Turning radius, braked declared	8.7 ft · 2.65 m	—	—
Fuel tank declared	31.7–58.1 qt · 30.0–55.0 L	42.3 qt · 40.0 L	differs

Source

Source