- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1968–1969
- 191 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Güldner G 60A specs: hp, weight, years
Güldner 6 L 79 six-cylinder diesel. The manufacturer claimed 58.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
58.9 hp
43.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Güldner G 60A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,592 lb
- 3-point lift
- 4,850 lb
- Top speed
- 16.3 mph
Güldner G 60A specs: key facts
The Güldner G 60A was built from 1968 to 1969.
The Güldner G 60A has a claimed engine power (gross or net not stated) of 43.9 kW (58.9 hp); it has no measured PTO figure.
The Güldner G 60A is two-wheel drive (2WD).
The Güldner G 60A has a Güldner 6 L 79 engine, a 6-cylinder 4.71 L diesel unit.Source 2
The Güldner G 60A weighs 2,990 kg (6,592 lb) unladen.
The Güldner G 60A has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Güldner G 60A lifts 2,200 kg (4,850 lb) at the lower-link ends.
Source · Traktorenlexikon, “Güldner G 60A”

How much horsepower does a G 60A have?
The only figure for the G 60A is 58.9 hp (43.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Güldner G 60A”
What engine is in a G 60A?
A G 60A has a Güldner 6 L 79, a 6-cylinder 4.71 L diesel engine.
| Make & model | Güldner 6 L 79Source 2 |
|---|---|
| Cylinders | 6, air-cooledSource 2 |
| Displacement | 287.5 ci · 4.71 LSource 2 |
| Max torque | 174 lb·ft · 236 N·m |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Güldner G 60A”
How much will a G 60A lift?
A G 60A lifts 4,850 lb (2,200 kg) at the lower-link ends.
| Pressure | 2,134 psi · 147 bar |
|---|---|
| Lift at ends | 4,850 lb · 2,200 kg |
| Rear PTO | 540/1000 rpm |
Source · Traktorenlexikon, “Güldner G 60A”
What transmission does a G 60A have?
Transmission specifications for the G 60A are below.
| Clutch | Pedal operated dry double clutch from Fichtel & Sachs |
|---|---|
| Steering | ZF Gemmer steering |
| Top speed | 16.3 mph · 26.22 km/h |
Source · Traktorenlexikon, “Güldner G 60A”
How much does a G 60A weigh?
A G 60A weighs 6,592 lb (2,990 kg) unladen.
| Unladen weight | 6,592 lb · 2,990 kg |
|---|---|
| Maximum permissible mass | 9,700 lb · 4,400 kg |
| Maximum front axle load | 3,858 lb · 1,750 kg |
| Maximum rear axle load | 7,496 lb · 3,400 kg |
| Wheelbase | 91.1 in · 2,315 mm |
| Length | 155.7 in · 3,955 mm |
| Width | 73.4 in · 1,865 mm |
| Height | 64.0 in · 1,625 mm |
| Ground clearance | 11.4 in · 290 mm |
| Front track | 54.1–59.1 in · 1,375–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Rear track | 54.1–59.1 in · 1,375–1,500 mmWikibooks gives one track for both axles; the article lists alternatives |
| Turning radius, braked | 14.9 ft · 4.55 m |
Source · Traktorenlexikon, “Güldner G 60A”
What oil does a G 60A take, and how much?
A G 60A engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 20.1 qt · 19.0 LSource: Traktorenlexikon, “Güldner G 60A” · single source, not independently verified |
| Transmission | 0.5 qt · 0.5 LSource: Traktorenlexikon, “Güldner G 60A” · single source, not independently verified |
| Hydraulic | 10.0 qt · 9.5 LSource: Traktorenlexikon, “Güldner G 60A” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a G 60A?
Within 10% of its 58.9 hp of claimed engine power, the same type, and first built within 15 years of it.
- Hermann Lanz D 260A58.9 hp engine, claimed · 1971–1979Side by side with the G 60A →
- Fahr D 54058.9 hp engine, claimed · 1955–1958Side by side with the G 60A →
- Massey Ferguson 274S59 hp engine, claimed · 1980–1987Side by side with the G 60A →
- Deutz-Fahr D 6207 (C)59 hp engine, claimed · 1981–1982Side by side with the G 60A →
- Lamborghini R-360 (DT)59.1 hp engine, claimed · 1969–1972Side by side with the G 60A →
- Ford 4600 (A)59.1 hp engine, claimed · 1975–1981Side by side with the G 60A →
Common questions about the Güldner G 60A
Is a G 60A two-wheel drive or four-wheel drive?
The Güldner G 60A is two-wheel drive (2WD).
What PTO does a G 60A have?
A G 60A has a 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Güldner G 75”; and Traktorenlexikon, “Güldner G 60A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Güldner G 60A — CC BY-SA 4.0, WIKIBOOKS-TL-58501 · revision 1069324. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Güldner G 75 — CC BY-SA 4.0, WIKIBOOKS-TL-16564 · revision 1078741. Wikibooks contributors (Traktorenlexikon). Original document