13 material differences
Tractor oneDeutz-Fahr D 6207 (C)1981–1982No measured PTO figureTractor twoGüldner G 60 A1968–1969No measured PTO figure
Which should you choose?
Read our verdict on the D 6207 (C) and the G 60 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 6207 (C) | G 60 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59 hp | 58.9 hp | — |
| Engine declared | KHD F4L 912 | Güldner 6 L 79 | differs |
| Displacement declared | 3.77 L | 4.71 L | +25% G 60 A |
| Maximum torque declared | 169 lb·ft · 229 N·m | 174 lb·ft · 236 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 16.3 mph · 26.22 km/h | differs |
| Clutch declared | Independent dry double clutch | Pedal operated dry double clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.3 gpm · 35.3 L/min | — | — |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Three-point lift, at the coupling points declared | 5,291 lb · 2,400 kg | 4,850 lb · 2,200 kg | +9% D 6207 (C) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,578 lb · 2,530 kg | 6,592 lb · 2,990 kg | +18% G 60 A |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 9,700 lb · 4,400 kg | +10% G 60 A |
| Wheelbase declared | 83.7 in · 2,125 mm | 91.1 in · 2,315 mm | +9% G 60 A |
| Length declared | 148.0 in · 3,760 mm | 155.7 in · 3,955 mm | — |
| Width declared | 81.1 in · 2,060 mm | 73.4 in · 1,865 mm | +10% D 6207 (C) |
| Ground clearance declared | 20.9 in · 530 mm | 11.4 in · 290 mm | +83% D 6207 (C) |
| Turning radius, braked declared | 11.9 ft · 3.63 m | 14.9 ft · 4.55 m | +25% G 60 A |
| Fuel tank declared | 74.0 qt · 70 L | 68.7 qt · 65 L | +8% D 6207 (C) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 6207 (C) sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr D 6207”
- Source: Traktorenlexikon, “Deutz D 6006”
Güldner G 60 A sources
Source
- Source: Traktorenlexikon, “Güldner G 60A”
- Source: Traktorenlexikon, “Güldner G 75”