• WhichTractor size: Utility
  • No lab test on file
  • 1980–1987
  • Record: Traktorenlexikon

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 274S specs: hp, weight, years

The manufacturer claimed 59 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

59 hp

44 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 274S”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,305 lb
Hyd. flow
9.5 gpm
Top speed
18.6 mph

Massey Ferguson 274S specs: key facts

  • The Massey Ferguson 274S was built from 1980 to 1987.

  • The Massey Ferguson 274S has a claimed engine power (gross or net not stated) of 44 kW (59 hp); it has no measured PTO figure.

  • The Massey Ferguson 274S was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 274S weighs 2,860 kg (6,305 lb) unladen.

  • The Massey Ferguson 274S has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Massey Ferguson 274S delivers 36.0 L/min (9.5 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 274S”

Illustration of the 1980–1987 Massey Ferguson MF 274 S, a 59 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 274S have?

The only figure for the 274S is 59 hp (44 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
59 hp

Source · Traktorenlexikon, “Massey Ferguson MF 274S”

How much will a 274S lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 274S are below.

Hydraulics & PTO — 274S hydraulics and PTO specifications
Pump flow9.5 gpm · 36.0 L/min
Hitch categoryCategory 2
Rear PTOengine-driven, 540/1000 rpmEngages under loadGround-speed PTO available

Source · Traktorenlexikon, “Massey Ferguson MF 274S”

What transmission does a 274S have?

Transmission specifications for the 274S are below.

Transmission — 274S transmission specifications
ClutchTwo-stage clutch
BrakesWet disc brake
SteeringHydrostatic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 274S”

How much does a 274S weigh?

A 274S weighs 6,305 lb (2,860 kg) unladen.

Weights & dimensions — 274S weights and dimensions
Unladen weight6,305 lb · 2,860 kgA = 3130
Wheelbase87.0 in · 2,210 mmA = 2180
Length148.0 in · 3,760 mm
Width78.7 in · 2,000 mm
Height96.9 in · 2,460 mm
Front track55.1–74.8 in · 1,400–1,900 mm
Rear track55.1–74.8 in · 1,400–1,900 mm

Source · Traktorenlexikon, “Massey Ferguson MF 274S”

Which tractors compare with a 274S?

Within 10% of its 59 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 274S

Is a 274S two-wheel drive or four-wheel drive?

The Massey Ferguson 274S was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 274S have?

A 274S has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 274S”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 274S — CC BY-SA 4.0, WIKIBOOKS-TL-83070 · revision 1056336. Wikibooks contributors (Traktorenlexikon). Original document