11 material differences · fewer than 12
Tractor oneFahr D 5401955–1958No measured PTO figureTractor twoGüldner G 60 A1968–1969No measured PTO figure
Which should you choose?
Read our verdict on the D 540 and the G 60 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 540 | G 60 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.9 hp | 58.9 hp | — |
| Engine declared | KHD F4L 514 | Güldner 6 L 79 | differs |
| Displacement declared | 5.32 L | 4.71 L | +13% D 540 |
| Maximum torque declared | 201 lb·ft · 273 N·m | 174 lb·ft · 236 N·m | +16% D 540 |
| Transmission | |||
| Top speed declared | 19.9 mph · 32 km/h | 16.3 mph · 26.22 km/h | +22% D 540 |
| Clutch declared | — | Pedal operated dry double clutch from Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | — | — |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,341 lb · 3,330 kg | 6,592 lb · 2,990 kg | +11% D 540 |
| Maximum permissible mass declared | 9,039 lb · 4,100 kg | 9,700 lb · 4,400 kg | +7% G 60 A |
| Wheelbase declared | 90.6 in · 2,300 mm | 91.1 in · 2,315 mm | — |
| Length declared | 153.1 in · 3,890 mm | 155.7 in · 3,955 mm | — |
| Width declared | 78.2 in · 1,987 mm | 73.4 in · 1,865 mm | +7% D 540 |
| Ground clearance declared | 16.5 in · 420 mm | 11.4 in · 290 mm | +45% D 540 |
| Turning radius, braked declared | 12.3 ft · 3.75 m | 14.9 ft · 4.55 m | +21% G 60 A |
| Fuel tank declared | 95.1 qt · 90 L | 68.7 qt · 65 L | +38% D 540 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 540 sources
- Source: Traktorenlexikon, “Fahr D 540”
- Source: Traktorenlexikon, “Fahr D 55 L”
Güldner G 60 A sources
- Source: Traktorenlexikon, “Güldner G 60A”
- Source: Traktorenlexikon, “Güldner G 75”