13 material differences
Tractor oneFord 4600 (A)1975–1981No measured PTO figureTractor twoGüldner G 60 A1968–1969No measured PTO figure
Which should you choose?
Read our verdict on the 4600 (A) and the G 60 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 4600 (A) | G 60 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 58.9 hp | — |
| Engine declared | Ford 201 DF | Güldner 6 L 79 | differs |
| Displacement declared | 3.29 L | 4.71 L | +43% G 60 A |
| Maximum torque declared | — | 174 lb·ft · 236 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 16.3 mph · 26.22 km/h | +14% 4600 (A) |
| Clutch declared | Pedal-operated dry BORG & BECK single-disc clutch | Pedal operated dry double clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.7 L/min | — | — |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Three-point lift, at the coupling points declared | 3,197 lb · 1,450 kg | 4,850 lb · 2,200 kg | +52% G 60 A |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,952 lb · 2,700 kg | 6,592 lb · 2,990 kg | +11% G 60 A |
| Maximum permissible mass declared | — | 9,700 lb · 4,400 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 91.1 in · 2,315 mm | +8% G 60 A |
| Length declared | 135.7 in · 3,448 mm | 155.7 in · 3,955 mm | +15% G 60 A |
| Width declared | 69.8–79.6 in · 1,772–2,022 mm | 73.4 in · 1,865 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 11.4 in · 290 mm | +93% 4600 (A) |
| Turning radius, braked declared | 10.8 ft · 3.28 m | 14.9 ft · 4.55 m | +39% G 60 A |
| Fuel tank declared | 63.9 qt · 60.5 L | 68.7 qt · 65 L | +7% G 60 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4600 (A) sources
Source
- Source: Traktorenlexikon, “Ford 4600”
Güldner G 60 A sources
Source
- Source: Traktorenlexikon, “Güldner G 60A”
- Source: Traktorenlexikon, “Güldner G 75”