• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1955–1958
  • 866 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fahr D 540 Full specifications

KHD F4L 514 four-cylinder diesel. The manufacturer claimed 58.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

58.9 hp

43.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 540”, claimed

Weight
7,341 lb
Hyd. flow
4.9 gpm
Top speed
19.9 mph

Fahr D 540 specs: key facts

  • The Fahr D 540 was built from 1955 to 1958.

  • The Fahr D 540 has a claimed engine power (gross or net not stated) of 43.9 kW (58.9 hp); it has no measured PTO figure.

  • The Fahr D 540 is two-wheel drive (2WD).

  • The Fahr D 540 has a KHD F4L 514 engine, a 4-cylinder 5.32 L diesel unit.Source 2

  • The Fahr D 540 weighs 3,330 kg (7,341 lb) unladen.

  • The Fahr D 540 has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the Fahr D 540 delivers 18.5 L/min (4.9 gpm).

Source · Traktorenlexikon, “Fahr D 540”

How much horsepower does a D 540 have?

The only figure for the D 540 is 58.9 hp (43.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
58.9 hp

Source · Traktorenlexikon, “Fahr D 540”

What engine is in a D 540?

A D 540 has a KHD F4L 514, a 4-cylinder 5.32 L diesel engine.

Engine — D 540 engine specifications
Make & modelKHD F4L 514Source 2
Cylinders4, air-cooledSource 2
Displacement324.6 ci · 5.32 LSource 2
Max torque201 lb·ft · 273 N·m @ 1,340 rpm
Electrical system12 V

Source · Traktorenlexikon, “Fahr D 540”

How much will a D 540 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the D 540 are below.

Hydraulics & PTO — D 540 hydraulics and PTO specifications
Pump flow4.9 gpm · 18.5 L/min
Rear PTODependent, transmission-driven, 540 rpm

Source · Traktorenlexikon, “Fahr D 540”

What transmission does a D 540 have?

Transmission specifications for the D 540 are below.

Transmission — D 540 transmission specifications
Top speed19.9 mph · 32 km/h

Source · Traktorenlexikon, “Fahr D 540”

How much does a D 540 weigh?

A D 540 weighs 7,341 lb (3,330 kg) unladen.

Weights & dimensions — D 540 weights and dimensions
Unladen weight7,341 lb · 3,330 kg
Maximum permissible mass9,039 lb · 4,100 kg
Maximum front axle load3,086 lb · 1,400 kg
Maximum rear axle load5,952 lb · 2,700 kg
Wheelbase90.6 in · 2,300 mm
Length153.1 in · 3,890 mm
Width78.2 in · 1,987 mm
Height91.5 in · 2,324 mm
Ground clearance16.5 in · 420 mm
Front track62.7–70.2 in · 1,592–1,784 mmthe article lists alternatives
Rear track60.8–70.7 in · 1,544–1,796 mmthe article lists alternatives
Turning radius, braked12.3 ft · 3.75 m

Source · Traktorenlexikon, “Fahr D 540”

Which tractors compare with a D 540?

Within 10% of its 58.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a D 540 two-wheel drive or four-wheel drive?

The Fahr D 540 is two-wheel drive (2WD).

What PTO does a D 540 have?

A D 540 has a dependent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fahr D 55 L”; and Traktorenlexikon, “Fahr D 540”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 540CC BY-SA 4.0, WIKIBOOKS-TL-43360 · revision 994397. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fahr D 55 LCC BY-SA 4.0, WIKIBOOKS-TL-43355 · revision 990487. Wikibooks contributors (Traktorenlexikon). Original document