• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1957–1959
  • 1,244 built

WhichTractor size, not the maker’s category

The source says so, in a sentence about this machine. How we decide what a machine is

Fahr D 130 A Full specifications

Güldner 2 LD two-cylinder diesel. The manufacturer claimed 16.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

16.8 hp

12.5 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 130 A”, claimed

Weight
2,513 lb
Top speed
11.6 mph

Fahr D 130 A specs: key facts

  • The Fahr D 130 A was built from 1957 to 1959.

  • The Fahr D 130 A has a claimed engine power (gross or net not stated) of 12.5 kW (16.8 hp); it has no measured PTO figure.

  • The Fahr D 130 A is two-wheel drive (2WD).

  • The Fahr D 130 A has a Güldner 2 LD engine, a 2-cylinder 1.31 L diesel unit.Source 2

  • The Fahr D 130 A weighs 1,140 kg (2,513 lb) unladen.

  • The Fahr D 130 A has a rear PTO running at 538 rpm.

Source · Traktorenlexikon, “Fahr D 130 A”

Fahr D 130 A tractor
Photo: JoachimKohlerBremen, CC BY-SA 4.0 via Wikimedia Commons · Wrong photo?

How much horsepower does a D 130 A have?

The only figure for the D 130 A is 16.8 hp (12.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
16.8 hp

Source · Traktorenlexikon, “Fahr D 130 A”

What engine is in a D 130 A?

A D 130 A has a Güldner 2 LD, a 2-cylinder 1.31 L diesel engine.

Engine — D 130 A engine specifications
Make & modelGüldner 2 LDSource 2
Cylinders2, air-cooledSource 2
Displacement79.6 ci · 1.31 LSource 2
Max torque48 lb·ft · 65 N·m @ 1,700 rpm
Electrical system12 V

Source · Traktorenlexikon, “Fahr D 130 A”

How much will a D 130 A lift?

Hydraulic and PTO specifications for the D 130 A are below.

Hydraulics & PTO — D 130 A hydraulics and PTO specifications
Pressure3,129 psi · 216 bar
Rear PTO538 rpm

Source · Traktorenlexikon, “Fahr D 130 A”

What transmission does a D 130 A have?

Transmission specifications for the D 130 A are below.

Transmission — D 130 A transmission specifications
SteeringZF steering
Top speed11.6 mph · 18.7 km/h

Source · Traktorenlexikon, “Fahr D 130 A”

How much does a D 130 A weigh?

A D 130 A weighs 2,513 lb (1,140 kg) unladen.

Weights & dimensions — D 130 A weights and dimensions
Unladen weight2,513 lb · 1,140 kg
Maximum permissible mass3,748 lb · 1,700 kg
Maximum front axle load1,543 lb · 700 kg
Maximum rear axle load2,205 lb · 1,000 kg
Wheelbase68.4 in · 1,737 mm
Length107.4 in · 2,727 mm
Width57.5 in · 1,460 mm
Height60.6 in · 1,540 mm
Ground clearance15.4 in · 390 mm
Front track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Turning radius, braked7.7 ft · 2.35 m

Source · Traktorenlexikon, “Fahr D 130 A”

Which tractors compare with a D 130 A?

Within 10% of its 17 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 130 A two-wheel drive or four-wheel drive?

The Fahr D 130 A is two-wheel drive (2WD).

What PTO does a D 130 A have?

A D 130 A has a 538 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fahr D 131 L”; and Traktorenlexikon, “Fahr D 130 A”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 130 ACC BY-SA 4.0, WIKIBOOKS-TL-49063 · revision 1080742. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fahr D 131 LCC BY-SA 4.0, WIKIBOOKS-TL-43364 · revision 1043101. Wikibooks contributors (Traktorenlexikon). Original document