• Rigid chassis
  • WhichTractor size: Compact
  • No lab test on file
  • 1965–1967
  • 16,800 built

WhichTractor size, not the maker’s category

The source says so, in a sentence about this machine. How we decide what a machine is

Deutz D 3005 specs: hp, weight, years

The manufacturer claimed 27.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

27.5 hp

20.5 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz D 3005”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,605 lb
Top speed
12.4–16.1 mph

Deutz D 3005 specs: key facts

  • The Deutz D 3005 was built from 1965 to 1967.

  • The Deutz D 3005 has a claimed engine power (gross or net not stated) of 20.5 kW (27.5 hp); it has no measured PTO figure.

  • The Deutz D 3005 is two-wheel drive (2WD).

  • The Deutz D 3005 weighs 1,635 kg (3,605 lb) unladen.

  • The Deutz D 3005 has an independent rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Deutz D 3005”

How does the Deutz D 3005 compare with its class?

  • Limitation:

    A maximum engine torque of 91.2 N·m is low for its class — 20% below the median of 113 N·m across the 60 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 119 comparable records. How we work this out

How much horsepower does a Deutz D 3005 have?

The only figure for the Deutz D 3005 is 27.5 hp (20.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
27.5 hp

Source · Traktorenlexikon, “Deutz D 3005”

How much will a Deutz D 3005 lift?

Hydraulic and PTO specifications for the Deutz D 3005 are below.

Hydraulics & PTO — Deutz D 3005 hydraulics and PTO specifications
Pressure2,538 psi · 175 bar
Hitch categoryCategory 1
Rear PTOIndependent, engine-driven, 540 rpm @ 2,075 engine rpm
PTO shaft29 x 34,9 x 8,7 mm (Form A)

Source · Traktorenlexikon, “Deutz D 3005”

What transmission does a Deutz D 3005 have?

Transmission specifications for the Deutz D 3005 are below.

Transmission — Deutz D 3005 transmission specifications
Top speed12.4–16.1 mph · 20.0–25.9 km/h

Source · Traktorenlexikon, “Deutz D 3005”

How much does a Deutz D 3005 weigh?

A Deutz D 3005 weighs 3,605 lb (1,635 kg) unladen.

Weights & dimensions — Deutz D 3005 weights and dimensions
Unladen weight3,605 lb · 1,635 kg
Maximum permissible mass6,614 lb · 3,000 kg
Maximum front axle load2,315 lb · 1,050 kg
Maximum rear axle load5,071 lb · 2,300 kg
Wheelbase73.4 in · 1,865 mm
Length127.8 in · 3,245 mm
Width60.4 in · 1,535 mm
Height61.4 in · 1,560 mm
Ground clearance15.9 in · 405 mm
Front track49.6–55.7 in · 1,260–1,416 mmthe article lists alternatives
Rear track49.2–59.4 in · 1,250–1,510 mmthe article lists alternatives
Turning radius, braked10.7 ft · 3.25 m

Source · Traktorenlexikon, “Deutz D 3005”

What oil does a Deutz D 3005 take, and how much?

A Deutz D 3005 engine takes 6.3 qt (6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Deutz D 3005 fluid capacities, grades and service intervals
SystemCapacity
Engine oil6.3 qt · 6 LSource: Traktorenlexikon, “Deutz D 3005” · single source, not independently verified
Transmission14.8 qt · 14 LSource: Traktorenlexikon, “Deutz D 3005” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Deutz D 3005?

Within 10% of its 25.2 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the Deutz D 3005

Is a Deutz D 3005 two-wheel drive or four-wheel drive?

The Deutz D 3005 is two-wheel drive (2WD).

What PTO does a Deutz D 3005 have?

A Deutz D 3005 has a independent 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm (Form A) shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz D 3005”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz D 3005 — CC BY-SA 4.0, WIKIBOOKS-TL-53184 · revision 922791. Wikibooks contributors (Traktorenlexikon). Original document