10 material differences · fewer than 12
Tractor oneDeutz (KHD) D 30051965–1967No measured PTO figureTractor twoMassey Ferguson MF 1301964–1972No measured PTO figure
Which should you choose?
Read our verdict on the D 3005 and the MF 130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 3005 | MF 130 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.5 hp | — | — |
| Engine declared | — | Perkins A 4.107 | — |
| Displacement declared | — | 1.75 L | — |
| Maximum torque declared | 67 lb·ft · 91 N·m | 77 lb·ft · 104 N·m | +14% MF 130 |
| Transmission | |||
| Top speed declared | 12.4–16.1 mph · 20.0–25.9 km/h | 12.4 mph · 20 km/h | differs |
| Clutch declared | — | Pedal operated dry air-cooled MF double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.4 gpm · 13.0 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | 2,062–2,276 psi · 142–157 bar | differs |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,605 lb · 1,635 kg | 2,910 lb · 1,320 kg | +24% D 3005 |
| Maximum permissible mass declared | 6,614 lb · 3,000 kg | 5,512 lb · 2,500 kg | +20% D 3005 |
| Wheelbase declared | 73.4 in · 1,865 mm | 72.0 in · 1,830 mm | — |
| Length declared | 127.8 in · 3,245 mm | 112.2 in · 2,850 mm | +14% D 3005 |
| Width declared | 60.4 in · 1,535 mm | 67.3 in · 1,710 mm | +11% MF 130 |
| Ground clearance declared | 15.9 in · 405 mm | 13.4 in · 340 mm | +19% D 3005 |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 9.0 ft · 2.75 m | +18% D 3005 |
| Fuel tank declared | 67.6 qt · 64 L | 47.6 qt · 45 L | +42% D 3005 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 3005 sources
- Source: Traktorenlexikon, “Deutz D 3005”
Massey Ferguson MF 130 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 30”
- Source: Traktorenlexikon, “Massey Ferguson MF 130 V”
- Source: Traktorenlexikon, “Massey Ferguson MF 130”