- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1986–1991
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Deutz-Fahr IN-trac 6.60 Turbo Full specifications
KHD BF6L 913 six-cylinder diesel. The manufacturer claimed 148 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
148 hp
110 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”, claimed
- Weight
- 13,889 lb
- Hyd. flow
- 14.8 gpm
- Top speed
- 18.6–24.9 mph
Deutz-Fahr IN-trac 6.60 Turbo specs: key facts
The Deutz-Fahr IN-trac 6.60 Turbo was built from 1986 to 1991.
The Deutz-Fahr IN-trac 6.60 Turbo has a claimed engine power (gross or net not stated) of 110 kW (148 hp); it has no measured PTO figure.
The Deutz-Fahr IN-trac 6.60 Turbo is four-wheel drive (4WD).
The Deutz-Fahr IN-trac 6.60 Turbo has a KHD BF6L 913 engine, a 6-cylinder 6.13 L diesel unit.Source 1
The Deutz-Fahr IN-trac 6.60 Turbo weighs 6,300 kg (13,889 lb) unladen.
The Deutz-Fahr IN-trac 6.60 Turbo has a rear PTO running at 540/1000 rpm.
The hydraulic pump of the Deutz-Fahr IN-trac 6.60 Turbo delivers 56.0 L/min (14.8 gpm).
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
How much horsepower does an IN-trac 6.60 Turbo have?
The only figure for the IN-trac 6.60 Turbo is 148 hp (110 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
What engine is in an IN-trac 6.60 Turbo?
An IN-trac 6.60 Turbo has a KHD BF6L 913, a 6-cylinder 6.13 L diesel engine.
| Make & model | KHD BF6L 913 |
|---|---|
| Cylinders | 6, air-cooledSource 2 |
| Displacement | 374.0 ci · 6.13 L |
| Max torque | 395 lb·ft · 535 N·m @ 1,650 rpmSource 2 |
| Injection | Direct injectionSource 2 |
Source · Traktorenlexikon, “Deutz-Fahr DX 160”
How much will an IN-trac 6.60 Turbo lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the IN-trac 6.60 Turbo are below.
| Pump flow | 14.8 gpm · 56.0 L/min |
|---|---|
| Rear PTO | engine-driven, 540/1000 rpmEngages under load |
| PTO shaft | 1 3/8 inch |
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
What transmission does an IN-trac 6.60 Turbo have?
Transmission specifications for the IN-trac 6.60 Turbo are below.
| Clutch | Hydraulic clutch |
|---|---|
| Brakes | Hydraulic disc brake |
| Steering | ZF hydrostatic steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
How much does an IN-trac 6.60 Turbo weigh?
An IN-trac 6.60 Turbo weighs 13,889 lb (6,300 kg) unladen.
| Unladen weight | 13,889 lb · 6,300 kg |
|---|---|
| Maximum permissible mass | 22,046 lb · 10,000 kg |
| Wheelbase | 106.4 in · 2,703 mm |
| Length | 204.7 in · 5,199 mm |
| Width | 94.1 in · 2,390 mm |
| Height | 125.2 in · 3,180 mm |
| Ground clearance | 22.8 in · 580 mm |
Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”
Which tractors compare with an IN-trac 6.60 Turbo?
Within 10% of its 148 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fendt Favorit 615 LS148 hp engine, claimed · 1979–1984Side by side with the IN-trac 6.60 Turbo →
- Fiat 1300 Super (DT)147.9 hp engine, claimed · 1978–1981Side by side with the IN-trac 6.60 Turbo →
- URSUS 1.604147.9 hp engine, claimed · 1978–1984Side by side with the IN-trac 6.60 Turbo →
- Lamborghini 150 Racing147.9 hp engine, claimed · 1995–2001Side by side with the IN-trac 6.60 Turbo →
- Lamborghini Champion 150147.9 hp engine, claimed · 1998–2004Side by side with the IN-trac 6.60 Turbo →
- SAME Titan 150147.9 hp engine, claimed · 1998–2001Side by side with the IN-trac 6.60 Turbo →
Everything else people ask
Is an IN-trac 6.60 Turbo two-wheel drive or four-wheel drive?
The Deutz-Fahr IN-trac 6.60 Turbo is four-wheel drive (4WD).
What PTO does an IN-trac 6.60 Turbo have?
An IN-trac 6.60 Turbo has a 540/1000 rpm rear PTO on a 1 3/8 inch shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Fahr DX 160”; and Traktorenlexikon, “Deutz-Fahr IN-trac 6.60 turbo”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 160 — CC BY-SA 4.0, WIKIBOOKS-TL-87338 · revision 1089850. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr IN-trac 6.60 turbo — CC BY-SA 4.0, WIKIBOOKS-TL-88072 · revision 1053831. Wikibooks contributors (Traktorenlexikon). Original document