• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1978–1983

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 2290 Full specifications

CASE 504 BDT six-cylinder diesel. The manufacturer claimed 147.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

147.9 hp

110.3 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 2290”, claimed

Weight
12,769–13,700 lb
3-point lift
9,921 lb
Hyd. flow
21.0 gpm
Top speed
15.5–18.6 mph

J.I. Case 2290 specs: key facts

  • The J.I. Case 2290 was built from 1978 to 1983.

  • The J.I. Case 2290 has a claimed engine power (gross or net not stated) of 110.3 kW (147.9 hp); it has no measured PTO figure.

  • The J.I. Case 2290 is two-wheel drive (2WD).

  • The J.I. Case 2290 has a CASE 504 BDT engine, a 6-cylinder 8.26 L diesel unit.

  • The J.I. Case 2290 weighs 5,792–6,214 kg (12,769–13,700 lb) unladen.

  • The J.I. Case 2290 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the J.I. Case 2290 lifts 4,500 kg (9,921 lb) at the lower-link ends.

  • The hydraulic pump of the J.I. Case 2290 delivers 79.5 L/min (21.0 gpm).

Source · Traktorenlexikon, “Case 2290”

How much horsepower does a 2290 have?

The only figure for the 2290 is 147.9 hp (110.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
147.9 hp

Source · Traktorenlexikon, “Case 2290”

What engine is in a 2290?

A 2290 has a CASE 504 BDT, a 6-cylinder 8.26 L diesel engine.

Engine — 2290 engine specifications
Make & modelCASE 504 BDT
Cylinders6, liquid-cooled
Displacement504.2 ci · 8.26 L
Max torque451 lb·ft · 611 N·m @ 1,300 rpm
Electrical system12 V

Source · Traktorenlexikon, “Case 2290”

How much will a 2290 lift, and what is its hydraulic flow?

A 2290 lifts 9,921 lb (4,500 kg) at the lower-link ends.

Hydraulics & PTO — 2290 hydraulics and PTO specifications
Pump flow21.0 gpm · 79.5 L/min
Lift at ends9,921 lb · 4,500 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,100 engine rpm
PTO shaft1 3/8" splines Form-1

Source · Traktorenlexikon, “Case 2290”

What transmission does a 2290 have?

Transmission specifications for the 2290 are below.

Transmission — 2290 transmission specifications
ClutchPedal operated wet disc clutch
BrakesPedal operated wet disc brake acting on differential side shafts
SteeringHydrostatic steering
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case 2290”

How much does a 2290 weigh?

A 2290 weighs 12,769–13,700 lb (5,792–6,214 kg) unladen.

Weights & dimensions — 2290 weights and dimensions
Unladen weight12,769–13,700 lb · 5,792–6,214 kgthe article lists alternatives
Wheelbase104.0 in · 2,642 mm
Length175.5 in · 4,458 mm
Width96.0 in · 2,438 mm
Height115.0 in · 2,921 mm
Ground clearance16.0 in · 406 mm
Front track60.0–88.0 in · 1,524–2,235 mm
Rear track60.0–124.0 in · 1,524–3,150 mm
Turning radius, braked12.1 ft · 3.68 m

Source · Traktorenlexikon, “Case 2290”

Which tractors compare with a 2290?

Within 10% of its 128.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 2290 two-wheel drive or four-wheel drive?

The J.I. Case 2290 is two-wheel drive (2WD).

What PTO does a 2290 have?

A 2290 has a independent 540/1000 rpm rear PTO on a 1 3/8" splines Form-1 shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Case 2290”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 2290CC BY-SA 4.0, WIKIBOOKS-TL-115392 · revision 989874. Wikibooks contributors (Traktorenlexikon). Original document